Milwaukee Cordless Tools

Milwaukee 49-22-1560 1/4-Inch Chuck Attachment

2011-01-27T11:10:00.001-08:00

Milwaukee 49-22-1560 1/4-Inch Chuck Attachment
$21.26

- The Milwaukee 1/4-Inch Chuck Attachment is an ideal replacement chuck and allows the same flexibility in drilling and driving capabilities as a driver drill or corded drill with a 3-jawed chuck. This replacement 1/4-inch chuck comes as standard equipment with Milwaukee 2.4-volt single and 2-speed cordless screwdrivers.

Read Original Review

49-81-0030 18V WORKLIGHT BULB

2011-01-20T08:10:00.001-08:00

49-81-0030 18V WORKLIGHT BULB
$4.99

- 18V WORK LIGHT BULB - Replacement Xenon bulb ~ For use on work light 49-24-0160

Read Original Review

Factory-Reconditioned Bare-Tool Milwaukee 2601-80 18-Volt Cordless M18 Lithium-Ion 1/2-Inch Driver/Drill (Tool Only, No Battery)

2011-01-16T02:54:00.001-08:00

Factory-Reconditioned Bare-Tool Milwaukee 2601-80 18-Volt Cordless M18 Lithium-Ion 1/2-Inch Driver/Drill (Tool Only, No Battery)
$76.00

- The Milwaukee M18 Compact Drill Driver has been built to withstand tough jobsite conditions. The tool balance, weight and grip have been optimized to reduce fatigue. Superior bit grip prevents frequent bit retightening and lost bits.

Read Original Review

12.00V,2000mAh,Ni-Cd, Replacement Battery for Milwaukee 0401-1,0401-4,0407-22,0407-6,0415-20,0415-21,0415-23,0420-1,0422-6,0430-1,0431-6,0435-1,0436-6,0445-1,0446-6,0456-20,0478-6,Compatible Numbers: 48-11-0140, 48-11-0141, 48-11-0200, 48-11-0251

2011-01-05T10:35:00.001-08:00

12.00V,2000mAh,Ni-Cd, Replacement Battery for Milwaukee 0401-1,0401-4,0407-22,0407-6,0415-20,0415-21,0415-23,0420-1,0422-6,0430-1,0431-6,0435-1,0436-6,0445-1,0446-6,0456-20,0478-6,Compatible Numbers: 48-11-0140, 48-11-0141, 48-11-0200, 48-11-0251
$34.88

- This replacement battery is also compatible with the following models of Milwaukee:0401-1, 0401-4, 0407-22, 0407-6, 0415-20, 0415-21, 0415-23, 0420-1, 0422-6, 0430-1, 0431-6, 0435-1, 0436-6, 0445-1, 0446-6, 0456-20, 0478-6, 9057-6, 9058-6

Read Original Review

Milwaukee 48-55-1490 Plastic Molded Carrying Case for 0730, 6310 and 6320 Cordless Circular Saws

2010-12-29T12:50:00.001-08:00

Milwaukee 48-55-1490 Plastic Molded Carrying Case for 0730, 6310 and 6320 Cordless Circular Saws
$26.99

- 48-55-1490 Milwaukee V28™ 6-1/2 in. Circular Saw Carrying Case

- The Milwaukee Carrying Case for cordless circular saws provides a convenient and safe place to store cordless circular saws. Ideal for storing both the tool and its related accessories, this well-built case allows you to keep everything in one spot for the job at hand. Designed to perfectly fit Milwaukee cordless 6-1/2-inch circular saws, including models 0730, 6310, and 6320, the case features custom molded, lightweight, rust-proof, and impact resistant plastic.
Read Original Review

Factory-Reconditioned Bare-Tool Milwaukee 6310-80 18-Volt Cordless 6-1/2-Inch Circular Saw (Tool Only, No Battery)

2010-12-25T07:25:00.001-08:00

Factory-Reconditioned Bare-Tool Milwaukee 6310-80 18-Volt Cordless 6-1/2-Inch Circular Saw (Tool Only, No Battery)
$116.99

- This is a factory reconditioned power circular saw. Reconditioned generally means that the power circular saw has been returned to the manufacturer, who brings the power circular saw back to like new condition. Some power circular saws may contain cosmetic blemishes. Includes 18V Cordless 6-1/2-in Circular Saw (Tool Only) - 6310-80, Circular Saw Blade - 48-40-4108, Allen Wrench, Tool Only - Battery and Charger Sold Separately, Product Manual

Read Original Review

Milwaukee 48-59-2818 18-Volt to 28-Volt Lithium-Ion and NiCad Slide Style 1-Hour Battery Charger

14.40V,1500mAh, Ni-Cd,Replacement Tools Battery for MILWAUKEE 0511-21, 0512-21, 0512-25, 0513-20, 0513-21, 0514-20, 0514-24, 0514-52, 0516-20, 0516-22, 0516-52, 0612-20, 0612-22, 0612-26, 0613-20, 0613-24, 0614-20,48-11-1000, 48-11-1014, 48-11-1024

2010-12-21T18:25:00.001-08:00

14.40V,1500mAh, Ni-Cd,Replacement Tools Battery for MILWAUKEE 0511-21, 0512-21, 0512-25, 0513-20, 0513-21, 0514-20, 0514-24, 0514-52, 0516-20, 0516-22, 0516-52, 0612-20, 0612-22, 0612-26, 0613-20, 0613-24, 0614-20,48-11-1000, 48-11-1014, 48-11-1024

- Replacement for MILWAUKEE 0511-21, 0512-21, 0512-25, 0513-20, 0513-21, 0514-20, 0514-24, 0514-52, 0516-20, 0516-22, 0516-52, 0612-20, 0612-22, 0612-26, 0613-20, 0613-24, 0614-20, 0614-24, 0615-24, 0616-20, 0616-24, 0617-24, 6562-21, 6562-23, 6562-24, 9081-20, 9081-22, 9082-20, 9082-22, 9083-20, 9083-22, LokTor P 14.4 TX, LokTor P 14.4 TXC, LokTor PDD 14.4 X, LokTor S 14.4 TX, LokTor S 14.4 TXC, LoTor S 14.4 TX, PAS 14.4 Power Plus, PCG 14.4 PES 14.4 T, PIW 14.4 HEX, PIW 14.4 SD, PJX 14.4 Power Plus, PLD 14.4 X, PN 14.4 Power Plus, PPS14.4 Power Plus, PSG 14.4 Power Plus, PSM 14.4 Power Plus Power Tools Battery,**?1?**Compatible Part Numbers:48-11-1000, 48-11-1014, 48-11-1024,***?2?***Compatible model Numbers: 0511-21, 0512-21, 0512-25, 0513-21, 0513-20, 0514-20, 0514-24, 0514-52, 0516-20, 0516-22, 0516-52, 0612-20, 0612-22, 0612-26, 0613-20, 0613-24, 0614-20, 0614-24, 0615-24, 0616-20, 0616-24, 0617-24, 6562-21, 6562-23, 6562-24, 9081-20, 9081-22, 9082-20, 9082-22, 9083-20, 9083-22 LokTor P 14.4 TX, LokTor P 14.4 TXC, LokTor PDD 14.4 X, LokTor S 14.4 TX, LokTor S 14.4 TXC, LoTor S 14.4 TX, PAS 14.4 Power Plus, PCG 14.4 PES 14.4 T, PIW 14.4 HEX, PIW 14.4 SD, PJX 14.4 Power Plus, PLD 14.4 X, PN 14.4 Power Plus, PPS14.4 Power Plus, PSG 14.4 Power Plus, PSM 14.4 Power Plus

Read Original Review

Milwaukee 2331-XL M12 12-Volt X-Large Heated Jacket Set

2010-12-17T12:15:00.001-08:00

Milwaukee 2331-XL M12 12-Volt X-Large Heated Jacket Set
$169.00

- Includes M12 Cordless Heated Jacket Kit - X-Large - 2331-XL, 12V M12 RED LITHIUM Battery, Battery Controller, 30-Minute Charger

Read Original Review

Milwaukee Replacement 48-11-1950 Power Tools battery

2010-12-13T18:30:00.001-08:00

Milwaukee Replacement 48-11-1950 Power Tools battery
$33.59

- NI-MH Power Tools Battery For Milwaukee 48-11-1950

Read Original Review

Milwaukee 48-11-1900 12V 2.1AH Power Tool Battery by Titan

2010-12-07T05:45:00.001-08:00

Milwaukee 48-11-1900 12V 2.1AH Power Tool Battery by Titan

- Milwaukee 48-11-1900 Replacement Power Tool Battery by Titan 12V 2.1Ah Ni-MH Fits And Replaces: 0502-23 (Kit), 0502-25 (Kit), 0502-52, 12V Power-Plus, LokTor P12PX, LokTor P12TX, /LokTor, S12PX, LokTor, S12TX, PAD12, PAS12PP, PCG12, PCS12T, B12, BF12, BX1"

Read Original Review

Bare-Tool Milwaukee 2625-20 M18 18-Volt Hackzall Cordless One-Handed Reciprocating Saw (Tool Only, No Battery)

2010-12-03T03:05:00.001-08:00

Bare-Tool Milwaukee 2625-20 M18 18-Volt Hackzall Cordless One-Handed Reciprocating Saw (Tool Only, No Battery)
$109.00

- This versatile M18 Hackzall One-Handed Reciprocating Saw features a compact and lightweight design for superior control and easier overhead work. The powerful motor delivers 0-3000 strokes per minute, and a 3/4in. stroke length allows for fast cutting through a wide range of material such as wood, metal and PVC. Cordless: Yes, Volts: 18, Rated RPM: 3,000, Variable Speed: Yes, Stroke Length (in.): 3/4, Strokes Per Minute (SPM): 3,000, Tool Length (in.): 13, Tool Weight (lbs.): 4.1, Battery Included: No, Charger Included: No, Case Included: No

Read Original Review

Milwaukee 0830-22 18-Volt Cordless V18 Lithium-Ion 6-1/2-Inch Circular Saw with Case

2010-11-26T21:25:00.001-08:00

Milwaukee 0830-22 18-Volt Cordless V18 Lithium-Ion 6-1/2-Inch Circular Saw with Case

- The V18 Circular Saw with its Li-ion battery cuts up to 45 2x12's per charge. Its 6-1/2 in. blade easily cuts 2x material at a 45° bevel in one pass. Rigid aircraft aluminum shoe and all metal upper and lower blade guards provide added jobsite durability. Electric brake provides quick blade stops. The Universal Li-ion/NiCd charger will charge any 18V to 28V Milwaukee battery in one hour or less. Tool is backwards compatible with existing Milwaukee NiCd 18V batteries.

- The Milwaukee 18-Volt Cordless Li-Ion 6-1/2-Inch Circular Saw comes with a convenient storage case and features a long-running Li-Ion rechargeable battery. Milwaukee 18-volt Li-Ion equipped tools provide up to 50-percent longer run times than 18-volt Ni-Cad equipped tools while at the same time offering "fade-free" power until the battery is completely drained. The saw features a heavy-duty aircraft-grade aluminum shoe that maintains its cutting accuracy. All metal upper and lower blade guards are also included, and the saw operates at 3,200 RPMs for fast, clean cuts. Other features include an electric brake for quick blade stops, and an easily accessible lower blade guard lever. This tool will run using Milwaukee's 18-volt Ni-Cad or Li-Ion batteries for added convenience. The saw comes backed with a manufacture's limited 5-year warranty.

What's in the Box
Cordless circular saw, 6-1/2-inch 24-tooth saw blade, rip fence guide, hex key, two 18-volt Li-Ion batteries, 1-hour universal charger, product manual, and storage case.

Read Original Review

Milwaukee 2330-M M12 12-Volt Medium Heated Jacket

2010-11-23T04:00:00.001-08:00

Milwaukee 2330-M M12 12-Volt Medium Heated Jacket
$119.00

Read Original Review

Bare-Tool Milwaukee 2470-20 M12 12-Volt Cordless PVC Shear (Tool Only, No Battery)

2010-11-19T21:15:00.001-08:00

Bare-Tool Milwaukee 2470-20 M12 12-Volt Cordless PVC Shear (Tool Only, No Battery)
$139.00

- Cutting faster, cleaner and closer than traditional methods, the new M12 Cordless PVC Shear utilizes a super sharp stainless steel blade for burr-free cuts, slices through 2â? PVC in as fast as 3 seconds, and offers an offset blade to cut PVC mounted to a stud or close to a wall. Powered by the MILWAUKEE M12 LITHIUM-ION battery, the new PVC Shear is able to cut over 200 times on a single charge.

Read Original Review

Milwaukee 48-11-1970 12-Volt 2.4 Amp Hour NiCad Slide Style Battery

2010-11-09T18:05:00.001-08:00

Milwaukee 48-11-1970 12-Volt 2.4 Amp Hour NiCad Slide Style Battery
$64.99

- Includes 12V 2.4 Amp-Hr. Battery - 48-11-1970

Read Original Review

Lithium Ion Power Tools Battery For Milwaukee 0928-23

2010-11-05T19:05:00.001-07:00

Lithium Ion Power Tools Battery For Milwaukee 0928-23
$78.39

- Lithium Ion Power Tools Battery For Milwaukee 0928-23

Read Original Review

Maximalpower Milwaukee 2.4v 6538-1 6539-1 48-11-0100 replacement 2000mAh Ni-Cd Battery for Milwaukee

2010-10-28T01:00:00.001-07:00

Maximalpower Milwaukee 2.4v 6538-1 6539-1 48-11-0100 replacement 2000mAh Ni-Cd Battery for Milwaukee

Read Original Review

Milwaukee 0856-22 18V Cordless Compact SDS Rotary Hammer Drill Kit

2010-10-23T23:40:00.001-07:00

Milwaukee 0856-22 18V Cordless Compact SDS Rotary Hammer Drill Kit
- Just got today from [...] Very well balanced. A little noisy in drill/hammer and hammer only mode but very smooth and quiet on drill only. Impressed that Milwaukee made the gear housing out of magnesium instaed of the usual plastic. Rotary is made in Germany. Hallelujah!!!! V18 batteries provide plenty of power(actually 20 volts as lithium ion batteries are made up of 4 volt packs and a V18 has 4 packs while a V28 sports 7). Everything fits well in the blow molded case. I inquired via phone to Milwaukee about this model. They said it was recently discontinued. A shame. I purshased the V18 over the V28 rotary as I have a hammer drill/driver,hatchet,flashlight and vaccuum that can use V18 batteries but not V28s. UPDATE DRILLED A 1/2" 2" deep hole,3 3/8 2" deep holes,10 3/16 1" deep holes and chipped out concrete that was filling a crack but was cracked and needed replaced on one battery. It still had life it was at the 1 light lit up stage. Very powerful comparable to my corded bosch bulldog 11224vsr.

- A compact, lightweight and highly ergonomic rotary hammer, the 0856-22 is ideal for drilling small to medium diameter holes (5/8" or lower).

Read Original Review

Factory-Reconditioned Milwaukee 0730-82 28-Volt 6-1/2-Inch Lithium Cordless Circular Saw Kit

2010-10-20T20:40:00.001-07:00

Factory-Reconditioned Milwaukee 0730-82 28-Volt 6-1/2-Inch Lithium Cordless Circular Saw Kit
$356.99

- This is a factory reconditioned power circular saw. Reconditioned generally means that the power circular saw has been returned to the manufacturer, who brings the power circular saw back to like new condition. Some power circular saws may contain cosmetic blemishes. Includes 28V Cordless V28 Lithium-Ion 6-1/2-in Circular Saw with Case - 0730-82, (2) 28 Volt Lithium-Ion Batteries - 48-11-2830, One-Hour Charger - 48-59-2801, Carrying Case - 48-55-1490, Circular Saw Blade, Rip Fence, Allen Key, Product Manual

Read Original Review

Milwaukee 6242-6 Compact Corded Band Saw with Case

2010-10-17T19:15:00.001-07:00

Milwaukee 6242-6 Compact Corded Band Saw with Case
$320.76

Read Original Review

Milwaukee 2691-22 18-Volt Compact Drill and Impact Driver Combo Kit

2010-10-13T14:45:00.001-07:00

Milwaukee 2691-22 18-Volt Compact Drill and Impact Driver Combo Kit
$188.50 - I was going to buy a cheaper brand cordless drive when we built our deck, but my son-in-law encouraged me to look at this set from Milwaukee. Yes, it cost 3x what the other driver cost, but it was well worth it. The impact driver has amazing torque and the Li-ion batteries are great and provide full power up until their last gasp. Charging is fast, so we never had any downtime - just kept swapping batteries all day.

Life is too short to buy cheap tools. Get something good like this Milwaukee set.

- The M18 2-tool combo kit combines power tools and accessories in a convenient carrying case at a great price. Tools Included: 1 Compact Drill/Driver and 1 Impact Wrench, Storage Case Included: Yes, Volts: 18, Battery Type: Lithium-ion 1.4 amp 18Volt, Battery Included: Yes (2), Charger Included: Yes

Read Original Review

TopCell ML-1214 12-Volt 1.4 Amp Hour NiCad Slide Style Replacement Battery for Milwaukee Tools

2010-10-10T07:40:00.001-07:00

TopCell ML-1214 12-Volt 1.4 Amp Hour NiCad Slide Style Replacement Battery for Milwaukee Tools
$37.50 - I use my Milwaukee cordless drill often in my guitar amp repair, speaker repair and guitar pedal modification businesses and had worn down both of the stock batteries. This battery came charged and ready to go. After a few weeks it still shows no signs of even needing a charge! Great replacement at a good price.

- 12 Volt Milwaukee NiCd Battery 1.4 Ah Replaces: Milwaukee 4-932-353-639 Fits Milwaukee Electric Tools Models: 12V Power-Plus, Worklight Kit, 0501-23 (Kit), 0502-03 (Kit), 0502-25 (Kit), 0502-52, 49-24-0150, LokTor P PX/TX/ NiMH, LokTor S 12 PX/TX/TX NiMH, PAD 12, PAD 12/0, PAS 12PP, PCG 12, PCS 12T, PEP 12T/T NiMH, PES 12T/T NiMH/T Flat Pack, PJX 12PP, PN 12PP, PPS 12PP, PSG 12PP, PSM 12PP All TopCell batteries are made with highest quality components from Panasonic® and Sanyo®. This battery is not manufactured by Milwaukee Electric.

Read Original Review

Bare-Tool Milwaukee 0724-20 V28 28-Volt 1/2-Inch Lithium Ion Cordless Hammer/Driver Drill (No Battery)

2010-10-05T21:35:00.001-07:00

Bare-Tool Milwaukee 0724-20 V28 28-Volt 1/2-Inch Lithium Ion Cordless Hammer/Driver Drill (No Battery)
$219.99 - I'm a commercial electrician and use this drill daily. Sometime for hours at a time. It has a ton of power. So much in fact it will darn near break your wrist if what you are drilling catches the bit and turns the drill when you least expect it. I'm constantly using large bore step bits to drill into steel j-boxes, door frames, etc. It's perfect. I have 3 other cordless drills and they stay at home. This is the only one I take to the job site with me every day. I'm so hard on this thing. I use it and use it hard. I have no clue what Consumer Reports could have possibly done to break it. I've used it so hard the drill body was too hot to rest your palm on and it didn't even smell. I've dropped it off a 10 foot step ladder onto concrete, picked it back up and used it the rest of the day. I've owned it 8 months and have put it through more than most people will in a lifetime and it's still going strong. I can't say enough about how extremely durable it is.

On the hammer setting it will drill 1/4" holes in block but that's about it, so don't expect much from the hammer setting if you have anything heavy-duty to drill. I use the Milwaukee 28v cordless SDS hammer drill for 99% of my hammer drilling anyway. (that drill is a superb hammer drill BTW)
As far as the other reviewers rating the drill down, READ THE PRODUCT DESCRIPTION!. Under the caption "What's in the box", it says one hammer drill! That's it! READ next time you fools!

- Milwaukee 0724 Cordless 28 Volt 1/2 in. Hammer-Drill uses the Milwaukee built high power motor to develop an enormous 600 in. lbs. of maximum torque and 0-600/0-1800 rpm, ideal for drilling larger holes and driving larger screws faster! Powering the 0724 is the revolutionary 28 Volt Lithium-Ion battery pack exclusively from Milwaukee. The 28 Volt battery pack weighs less than an 18 Volt pack yet delivers two times the run-time, making this the ideal solution for all drilling and driving needs! Only the Milwaukee battery can be inserted in the reverse position which allows for the ultimate balance when working overhead or in hard to reach areas. The 0724 comes standard with a 1/2 in. all-metal, single-sleeve, ratcheting chuck with all carbide jaws that keeps bits from falling out and drill bits from slipping! This is the industry's tightest gripping chuck and comes standard only on the 0724. A comfortable non-slip, soft-grip handle reduces vibration and fatigue. The 0724 also comes standard with the patented Clip-Lok System. The Clip-Lok System attaches securely to the operator's belt or tool bags and easily releases with one hand, ideal when working from a ladder or when there is nowhere to place the tool when adjusting or positioning a work piece. The Clip-Lok System keeps the drill within arms length at all times. The Clip-Lok System also features an on-board bit holder which holds up to two standard Phillips bits. Tool only (no battery or charger) Clip-Lok System Side Handle No. 2 Phillips Bit. NO INCLUDES- Tool ONLY.

- Milwaukee’s 28-volt lithium-ion cordless is always charged up for the beefiest drilling and driving applications. The tool switches easily between drill, drive, and hammer modes for less downtime and smoother transitions between tasks. This ½-inch hammer drill cranks out a whopping 600 in./lbs. of torque for drilling large holes and driving heavy bolts for deck support, playground equipment, and post-and-beam construction. The two variable speeds do it fast, too, spinning along at 0-600 or 0-1800 rpm’s for more productivity.

The V28 hammer-drill comes standard with a ½-inch all-metal, single-sleeve, ratcheting chuck with carbide jaws that keep bits from falling out or slipping. A comfortable non-slip, soft-grip handle reduces vibration and fatigue. For easy transport and access, Milwaukee’s patented Clip-Lok system attaches the tool securely to the operator's belt or tool bag and easily releases with one hand—a boon for ladder work where there’s is nowhere safe to rest the tool. Milwaukee cover’s this nailer with a 5-year warranty. Battery not included. --Brian Olson

What’s in the Box
28-volt hammer drill

Read Original Review

Milwaukee Elec Tool 48-11-0100 Battery Pack For 2.4 Volt Cordless Tools

2010-10-02T21:05:00.001-07:00

Milwaukee Elec Tool 48-11-0100 Battery Pack For 2.4 Volt Cordless Tools
$27.65

- Battery Pack For 2.4 Volt Cordless Tools Fits Models 6539-1, 6540-1 & 6546-1, 1 Hour Fast Charge

Read Original Review

Milwaukee (MLW262521) M18 Hackzall Cordless Reciprocating Saw Kit with XC Battery

2010-09-29T18:10:00.001-07:00

Milwaukee (MLW262521) M18 Hackzall Cordless Reciprocating Saw Kit with XC Battery
$235.99

-

Features and Benefits:

One-handed design provides superior control and versatility over a standard reciprocating saw
Compact size allows for cutting in tight spaces, and light weight makes overhead work easier
QUIK-LOK® Blade Clamp offers fast, easy tool free blade changes for SAWZALL® Blades and HACKZALL® Blades
Built-In LED light illuminates the work surface while cutting
Compatibile with M18™ XC High Capacity LITHIUM-ION Batteries and M18™ Compact LITHIUM-ION Batteries

The HACKZALL® M18™ Cordless One-Handed Recip Saw features a compact and light weight design for superior control and versatility. The powerful motor delivers 0-3,000 strokes per minute and a 3/4” stroke length allows for fast cutting through a wide range of material such as wood, metal and PVC. The dual gear anti-vibration system increases control and accuracy. The 2625-21 also features a QUIK-LOK® blade clamp which offers fast and easy blade changes. Kit includes M18™ XC high capacity Lithium-Ion battery, 1 hour charger, SAWZALL® blade and contractor bag.

Read Original Review

Milwaukee Replacement Filter for Cordless Wet/Dry Vacs 49 90 1900

2010-09-26T17:55:00.001-07:00

Milwaukee Replacement Filter for Cordless Wet/Dry Vacs 49 90 1900

- Milwaukee Replacement Filter for Milwaukee Cordless Wet/Dry Vacs.

Read Original Review

Milwaukee 9099-23 18-Volt Ni-Cad 7/16-Inch Cordless Impact Wrench

2010-09-20T17:05:00.001-07:00

Milwaukee 9099-23 18-Volt Ni-Cad 7/16-Inch Cordless Impact Wrench
$330.00

- U.S.A. Cordless: Yes, Max. Torque (ft.-lbs.): 270, Impacts Per Minute (IPM): 2,600, Drive (in.): 7/16, Speed - No Load (RPM): 1,400, Reversible: Yes, Amps: N/A, Volts: 18, Battery Included: Yes, (2) 18V batteries, Charger Included: Yes, vehicle charger, Case Included: Yes, contractor bag

Read Original Review

48-11-0200 Compatible Milwaukee Power Tool Battery

2010-09-17T16:25:00.001-07:00

48-11-0200 Compatible Milwaukee Power Tool Battery

- 48-11-0200 Milwaukee Power Tool Battery Compatible with the following models: 12 volt cordless tools, 0401-1, 0407-22, 0407-6, 0415-20, 0415-21, 0415-23, 0422-6, 0431-6, 0436-6, 9057-6, 9058-6, 0446-6, 0478-6, 9057-6, 058-6, 0435-1. Ni-CD, 12V 2000mAh TB1102R.20C

Read Original Review

Ni-Cad Battery Pack, 2.4V, for Milwaukee Cordless Screwdrivers and Caulking Guns

2010-09-14T16:10:00.001-07:00

Ni-Cad Battery Pack, 2.4V, for Milwaukee Cordless Screwdrivers and Caulking Guns

Read Original Review

Milwaukee 9099-20 18-Volt Ni-Cad 7/16 Inch Cordless Impact Wrench

2010-09-11T15:45:00.001-07:00

Milwaukee 9099-20 18-Volt Ni-Cad 7/16 Inch Cordless Impact Wrench
$289.99

- U.S.A. Cordless: Yes, Max. Torque (ft.-lbs.): 270, Impacts Per Minute (IPM): 2,600, Drive (in.): 7/16, Speed - No Load (RPM): 1,400, Reversible: Yes, Amps: N/A, Volts: 18, Battery Included: No, Charger Included: No, Case Included: No

Read Original Review

Milwaukee Elec. Tool 244621XC M12 Cordless Grease Gun

2010-09-08T15:35:00.001-07:00

Milwaukee Elec. Tool 244621XC M12 Cordless Grease Gun

- Over 8000 P.S.I. maximum operating pressure. Delivers up to 7 grease cartridges per battery charge. Comfortable handle grip design allows for easy prolonged use. Durable design is able to withstand drops and harsh jobsite conditions. On board fuel gauge, hose storage, and base stand makes the tool convenient and minimizes mess and downtime. Includes case, charger, and (1) 12V XC battery.

Read Original Review

Milwaukee 2662-22 NA M18 M18 Cordless 1/2" High Torque Impact Wrench w/Pin Detent Kit 2662-22

2010-09-05T14:25:00.001-07:00

Milwaukee 2662-22 NA M18 M18 Cordless 1/2" High Torque Impact Wrench w/Pin Detent Kit 2662-22

- The M18 Cordless 1/2" High Torque Impact Wrenches provide industry leading power in a compact size. Built with a Milwaukee 4-pole motor and a powerful impact mechanism, the 2662-22 and 2663-22 deliver 450 ft-lbs of torque. A variable speed trigger provides speed control between 0-1900 RPM & 0-2200 IPM. The 2662-22 has a 1/2" anvil with detent pin to achieve superior socket retention, while the 2663-22 has a 1/2"anvil with friction ring for quick and easy one-handed socket changes. Features:Milwaukee Designed Impact Mechanism: Delivers 450 ft- lbs of torqueCompact Size Light Weight: 8-7/8" Length and 5.2 lbsMilwaukee 4-Pole Frameless Motor: Delivers maximum run-time1/2" Anvil w/Pin Detent: Provides maximum socket retentionIncludes:(2) XC High Capacity LITHIUM-ION Batteries (48-11-1828)M18 LITHIUM-ION Battery Charger (48-59-1801)Kitbox

Read Original Review

NI-MH Power Tools Battery For Milwaukee 48-11-1970

2010-09-02T14:10:00.001-07:00

NI-MH Power Tools Battery For Milwaukee 48-11-1970
$33.59

- NI-MH Power Tools Battery For Milwaukee 48-11-1970

Read Original Review

Bare-Tool Milwaukee 0824-20 18-Volt Cordless V18 Lithium-Ion 1/2-Inch Hammer Drill (Tool Only, No Battery)

2010-08-30T13:20:00.001-07:00

Bare-Tool Milwaukee 0824-20 18-Volt Cordless V18 Lithium-Ion 1/2-Inch Hammer Drill (Tool Only, No Battery)
$154.99 - I am a finish carpenter/ contractor and have used so many different cordless drills over the years (Dewalt, Ryobi, Makita). Every time they died on me I changed brands until I found this drill. I bought mine in a combo with the sawzall, and circular saw for 0 on sale. This drill performs far superior to all the others in every way. The most important are the strength and battery life/power. This drill keeps going through hot and cold conditions, and doesn't bog down as it gets to the end of it's cycle. This thing is great for drilling into concrete and hard woods. I have put mine through a lot and it shows no signs of ever stopping, or loss of power. The batteries last forever, and show you how much they have left on side. Also it can be used with ni cad or lithium batteries, and the lithium charger charges both.

Also this drill may be a little heavy but it is built indestructable. I dropped mine off a 40ft roof onto the pavement, and it is fine. The bit it had in it broke and it got scratched up a bit, but the chuck is still straight, and the hard plastic body is still strong and in good shape! Other drills I have owned have broken from falling from a 7ft ladder (Dewalt). Milwaukee spares no expense on the quality of their tools.

My favorite aspect of this drill is the chuck for two reasons. As stated in other reviews it is made of metal and carbide for a better grip on your bits, and durability. Also the chuck ratchets tight to whatever you put in it's jaws. The motor keeps the chuck locked in place when the drill is not in use so you don't have to tighten it with two hands, or by running the drill with your other hand on the chuck. I have never had the chuck slip on anything I have put in it, the ratchet really gets a great grip on the bit or driver.

There are so many reasons to get this drill. Too many to write here. There is no doubt it is the strongest and best made drill on the market. It will be the last time you switch brands, that's for sure.

- The V18 Hammer Drill with its Li-ion battery cuts up to 25 2-9/16 in. selfeed bit holes per charge. High output motor provides 550 in-lbs. of torque. Patented reversible battery allows drill to fit in tight areas and optimizes balance while working overhead. 1/2 in. metal ratcheting chuck with carbide jaws provides superior bit grip. Tool is backwards compatible with existing Milwaukee NiCd 18V Batteries.

- The Milwaukee 18-Volt Cordless Li-Ion 1/2-Inch Hammer Drill comes with a convenient storage case and is compatible with long-running 18-volt Li-Ion rechargeable batteries. Milwaukee 18-volt Li-Ion equipped tools provide up to 50-percent longer run times than 18-volt Ni-Cad equipped tools, while at the same time offering "fade-free" power until the battery is completely drained. The hammer drill comes standard with an all-metal, single-sleeve, ratcheting chuck with carbide jaws to prevent bits from falling out or slipping. A comfortable non-slip, soft-grip handle reduces vibration and fatigue, and the drill comes with a side handle for added drilling/driving stability. A high output motor provides 550 in./lbs. of torque, and the tool is backwards compatible with existing Milwaukee Ni-Cad 18-volt batteries. The driver comes backed with a manufacture's 5-year limited warranty. The battery and charger are sold separately.

What's in the Box
Cordless drill/driver, side handle, No. 2 Phillips bit, and user's manual.

Read Original Review

Milwaukee 2710-20 M18 AC/DC Charger

2010-08-27T04:55:00.001-07:00

Milwaukee 2710-20 M18 AC/DC Charger
$95.98 - GREAT UNIT TO HAVE WHEN YOU WORK OUDOORS TO KEEP BATTERIES CHARGED ANYWHERE IN YOU CAR SAVES THE TRIP HOME I ALWAYS USE MY 2663 IMPACT GUN AND SAWZALL WITH THIS CHARGER I AM NEVER OUT OF JUICE AGAIN WELL WORTH THE SPEND EXTRA BUCK FOR THE AWESOME CONVENIENCE

- The Milwaukee 2710-20 18-Volt M18 AC/DC Wall and Vehicle Charger is a dually functional unit that has the capability to charge M18 Lithium-Ion batteries in a traditional wall outlet or vehicle DC outlet. Now, whether the user is in a work truck on the work site, one charger can do the job. The 2710-20 model is covered by the Milwaukee 5-Year Warranty. Features: AC Wall Charger DC Vehicle Charger 2-In-One Design What's In The Box: Milwaukee 2710-20 M18 AC/DC Wall and Vehicle Charger

Read Original Review

Bare-Tool Milwaukee 0729-20 V28 4-3/4-Inch by 4-3/4-Inch Capacity 28-Volt Lithium Cordless 2 Range-Variable Speed Portable Band Saw (Tool Only, No Battery)

2010-08-24T03:25:00.001-07:00

Bare-Tool Milwaukee 0729-20 V28 4-3/4-Inch by 4-3/4-Inch Capacity 28-Volt Lithium Cordless 2 Range-Variable Speed Portable Band Saw (Tool Only, No Battery)
$289.95 - I use mine to cut metal molding & other channel/stuff; however, this is the ultimate in cutting the stems of cut flowers. Get the vase ready, trim the leaves to above the water line, cut at a slant, & immediately place the bunch in the water. The flowers last two more days and open faster. So, Guys, when you buy this, do it for her!

Lighter, all day with full power, and typical Milwaukee quality...and it does flowers.

- The Milwaukee 0729 Cordless V28 Portable Band Saw uses a high powered Milwaukee built motor to deliver optimal cutting speed and performance. Powering the 0729 is the revolutionary 28 Volt Lithium-Ion battery pack exclusively from Milwaukee. The 28 Volt battery pack weighs less than an 18 Volt pack yet delivers two times the run-time, expanding the list of tools that can be driven on this platform. The battery is positioned so that the balance and line of sight to the cut are not compromised. This band saw has the deep cut capacity of 4-3/4 in. x 4-3/4 in. which makes this tool extremely versatile and productive. The variable speed trigger delivers optimal cutting speeds of 0-225/0-350 surface feet per minute. The LED light aids in making cuts in dark places. A comfortable non-slip soft grip handle provides a better gripping surface and reduces operator fatigue.

Read Original Review

Milwaukee 2662-20 M18 18-Volt Cordless High Torque Impact Wrench with

2010-08-21T03:01:00.001-07:00

Milwaukee 2662-20 M18 18-Volt Cordless High Torque Impact Wrench with

- The Milwaukee 2662-20 M18 18-Volt Cordless High Torque Impact Wrench with Pin Detent - Bare Tool with Case provides an industry leading power, delivering 450 foot-pounds of torque in a compact size. The Milwaukee 2662-20 is built with a Milwaukee 4-pole motor and a powerful impact mechanism. A variable speed trigger provides speed control between 0-1900 RPM & 0-2200 IPM for the Milwaukee 2662-20. The 2662-20 has a 1/2-inch anvil with detent pin to achieve superior socket retention. Features: Milwaukee designed impact mechanism delivers 450 foot-pounds of torque 1/2-inch anvil w/pin detent provides maximum socket retention Compact size light weight, only 8-7/8-inch length and 5.2 lbs Milwaukee 4-Pole frameless motor delivers maximum run-time What's In The Box: Milwaukee 2662-20 M18 18-Volt Cordless High Torque Impact Wrench with Pin Detent - Bare Tool Carrying Case Batteries and Charger NOT Included

Read Original Review

Power Tool Compatible With Milwaukee 12 Volts 2000 mAh NICD Tool-138.

2010-08-18T02:45:00.001-07:00

Power Tool Compatible With Milwaukee 12 Volts 2000 mAh NICD Tool-138.

Read Original Review

2.40V,1500mAh,Ni-Cd, Replacement Power Tools Battery for MILWAUKEE 6538-1, 6539-1, 6539-6, 6545-6, 6546-1, 6546-6, 6550-20, Compatible Part Numbers: 48-11-0100

2010-08-15T02:30:00.001-07:00

2.40V,1500mAh,Ni-Cd, Replacement Power Tools Battery for MILWAUKEE 6538-1, 6539-1, 6539-6, 6545-6, 6546-1, 6546-6, 6550-20, Compatible Part Numbers: 48-11-0100
$15.70

- This ITEM is compatible with the following models:Milwaukee 6538-1, Milwaukee 6539-1, Milwaukee 6539-6, Milwaukee 6545-6, Milwaukee 6546-1, Milwaukee 6546-6, Milwaukee 6550-20

Read Original Review

V28 Lithium-Ion One-Hour Charger - 48-59-2801 28V Charger

2010-08-12T02:25:00.001-07:00

V28 Lithium-Ion One-Hour Charger - 48-59-2801 28V Charger
$42.00 - I have no complaints about this charger. You can get the battery on and off easily and it can fully charge a dead battery in about an hour. The cord could be a bit longer but that's about the only critique I have.
I may even buy more of these as I have multiple batteries on rotation.

- Item #: MLW48-59-2801.

Features & Benefits:

High visability 360 degree LED
Extended feet prevents tipping forward
Encapsulated electronics board for durability
Pass-through plug - conserves limited outlet space at jobsite
Battery LED's light as charged

Customers also search for: Discount V28 Charger, Buy V28 Charger, Wholesale V28 Charger, 045242150212, ToolWeb, Specialty Cordless Tools and Kits

- The Milwaukee 1-Hour Battery Charger quickly and conveniently recharges the batteries for the complete V28 Lithium-Ion cordless system of tools. Designed with encapsulated electronics to provide extreme durability and a pass-through plug to keep outlet space open, this charger is also generator and inverter ready. A high visibility LED display shows the state of the charge. This charger is backed by a limited 5-year warranty.

Read Original Review

Milwaukee 2680-22 NA M18 M18 Cordless 4-1/2" Cut-off / Grinder-Bare Tool 2680-22

2010-08-09T01:15:00.001-07:00

Milwaukee 2680-22 NA M18 M18 Cordless 4-1/2" Cut-off / Grinder-Bare Tool 2680-22

- The M18 Cordless 4-1/2" Cut-off / Grinder provides speed, durability and ease-of-use to the industrial user. Built with a Milwaukee 4-pole motor, the 2680-20 delivers maximum power when cutting or grinding. The 2680-20 is the only cordless cut-off / grinder in the market to provide the user-preferred paddle switch for comfort and ease-of use when operating in various positions. L-shape intake vents protect the cut-off / grinder by keeping harmful debris from entering the tool and damaging internal components.Features:Milwaukee 4-Pole Motor- Delivers maximum power when cutting or grindingOverload Protection- Prevents damage to the tool and battery in abusive situationsDebris Baffles - L-shape vents keep debris from entering the tool and damaging internal components to help increase tool life.Tool Free, Burst Resistant Guard- Allows for quick, easy guard adjustments. Easy to access and actuate too free guard makes it easier and less time consuming to adjust the guard for various applications.Paddle Switch Design- The only cordless cut-off /grinder in the market with a paddle switch designUp to 35% faster cutting speedUp to 50% more cuts on a single charge3-Position Side Handle- Provides optimal Control and Versatility

Read Original Review

Milwaukee 0880-20 18-Volt Cordless Wet/Dry Vacuum

2010-08-05T23:50:00.001-07:00

Milwaukee 0880-20 18-Volt Cordless Wet/Dry Vacuum
$88.99 - Having been an avid owner of quality Milwaukee tools for many years I've become the local "Expert" when any neighbor in my area intends to invest in any tool for their shop.
As expected, the Milwaukee Mdl. 0880-20 18-volt Cordless Wet/Dry Vacuum does not disappoint in performance or quality.
The portability, light weight,versatility and ruggedness of this tool is outstanding. A continuous run time of 8-10 minutes should suffice for any small, wet/dry quick pick-up job. This is exactly what this tool was designed to accomplish. Anything more and one should be getting the "Shop Vac" anyway.
I'll never cease to be amazed at the consistency of the quality of Milwaukee items. And, they continue to succeed in selling their line of tools at competitive prices.
Buy it. You'll like it.

- The Milwaukee cordless wet/dry vacuum works with all Milwaukee 18V slide-on batteries to offer higher air power and suction to provide quick and easy removal of dust, debris and water, along with long continuous run time. Gallons: 2, CFM: 45

Read Original Review

10C Technology Universal Multi-Port Rapid Crew Charger

2010-08-02T23:20:00.001-07:00

10C Technology Universal Multi-Port Rapid Crew Charger
$313.00

- Professional Power for the Trade Universal Professional AC Rapid Charger. The Pro Charge is the professional charger for jobs that require power on demand. Unlike "Rapid Chargers" found in many stores, the Pro Charge unit can have your tools back to full power in 15 minutes or less. The benefit is in its ability to improve battery life and not damage the batteries. When you need power on demand, you need Professional Charge Quality from 10C Technologies. Brand Specific Base Connector Special adapters (sold separately) to fit all of your major batteries - Single and Dual Brand Adapters. OEM Vendor Compatibility: DeWALT, Milwaukee, Bosch, Hitachi, Makita, B&D, Skil, Panasonic, Craftsman, Ridgid, Porter Cable, Ryobi, FireStorm, (All Brands) TBD.

Read Original Review

Milwaukee 9082-22 3/8-Inch 14.4-Volt Ni-Cad Cordless Square Drive Impact Wrench

2010-07-30T23:15:00.001-07:00

Milwaukee 9082-22 3/8-Inch 14.4-Volt Ni-Cad Cordless Square Drive Impact Wrench
$219.99

- If you spend a lot of time driving screws in tight quarters, Milwaukee’s 3/8-Inch 14.4-Volt Ni-Cad Cordless Square Drive Impact Wrench is the tool for you. Despite its small size –- it measures a miniscule 7-1/2 inches -- this powerful little tool revs to 2200 RPM and 2500 IMP, making it suitable for most jobs. One of the biggest benefits you’ll get with this package is the ability to get jobs done faster. Its capable of delivering 1,050 in. lbs. of torque, and the 2.4 amp hour battery pack substantially ups the amount of time you can use it on a single charge. Plus, its 4.3 lbs. total weight means your wrist won’t become fatigued very easily. A handy addition Milwaukee made this wrench and many of its other cordless tools is the reversible battery pack, which lets you customize the wrench to your workspace, This eliminates awkward angles and lets you snake into cramped spaces with ease. Power, portability, and durability is what you’ll get with the Milwaukee 3/8-Inch 14.4-Volt Ni-Cad Cordless Square Drive Impact Wrench. This is a great choice for all-purpose driving needs, and is fabulous for finish jobs.

What's in the Box
Milwaukee cordless wrench, two 2.4 amp-hr. 14.4V batteries, universal charger, carrying case

The Milwaukee story
Milwaukee Electric Tool Corporation is an industry leading manufacturer and marketer of heavy-duty, portable electric power tools and accessories for professional users worldwide. Since its founding in 1924, Milwaukee has focused on a single vision: to produce the best heavy-duty electric power tools and accessories available to professional user. Today, the Milwaukee name stands for the highest quality, durable and reliable professional tools money can buy.

Read Original Review

Milwaukee 48-11-1024 14.4-Volt 2.4 Amp Hour NiCad Slide Style Battery

Milwaukee 48-59-0300 2.4 Volt One Hour Battery Charger

2010-07-27T22:50:00.001-07:00

Milwaukee 48-59-0300 2.4 Volt One Hour Battery Charger
$50.49 - Received wrong model. I wanted a -0300 model and I received a -0180. Returned for a REFUND and got it.

-

2.4 VOLT 1 HR. CHARGER

Read Original Review

Factory-Reconditioned Milwaukee 2490-83 12-Volt Cordless M12 Lithium-Ion 3-Tool Combo Kit

2010-07-24T22:40:00.001-07:00

Factory-Reconditioned Milwaukee 2490-83 12-Volt Cordless M12 Lithium-Ion 3-Tool Combo Kit
$159.00 - This reconditioned kit was like new. Other than the reconditioned markings, it was the same as new, as far as I could discern. The performance of these tools is more than adequate for most of the handyman work I do. I use the driver for most tasks and the impactor for tasks that require more torque. I now only use my 14.4v DeWalt impact driver for continuous heavy duty driving. I am very happy with my purchase. However, I would probably buy the new kit from Amazon for a few dollars more if I had to do it again. New Milwaukee items get a 5 year warranty and reconditioned does not.

- This is a factory reconditioned power tool. Reconditioned generally means that the tool has been returned to the manufacturer, who brings the tool back to like new condition. Some tools may contain cosmetic blemishes. Includes 12V Cordless M12 Lithium-Ion 1/4-in Hex Impact Driver (2450-22), 12V Cordless Lithium-Ion Sub-Compact Driver/Drill - 2401-22, 12V Cordless M12 Work Light - 49-24-0145, (2) 12V Li-ion Battery Packs, 30-Minute Charger, Heavy Duty Carrying Case

Read Original Review

Milwaukee 48-32-4401 Shockwave Driver Bit Set, 29-Piece

NI-MH Power Tools Battery For Milwaukee 9099-23

2010-07-21T22:25:00.001-07:00

NI-MH Power Tools Battery For Milwaukee 9099-23
$51.99

- NI-MH Power Tools Battery For Milwaukee 9099-23

Read Original Review

14.4 Volt 2.0 Ah NiCd Battery - Replaces: Milwaukee 48-11-1000

2010-07-18T22:20:00.001-07:00

14.4 Volt 2.0 Ah NiCd Battery - Replaces: Milwaukee 48-11-1000
$50.95

- 14.4 Volt Milwaukee NiCd Battery 2.0 Ah Replaces: Milwaukee 48-11-1000 Fits Milwaukee Electric Tools Models: All 14.4V Power-Plus, Worklight, 0511-21 (Kit), 0512-21/25, 0513-20, 0514-20/24/52, 0516-20/22/52, 49-24-0150, LokTor P 14.4, LokTor S 14.4 TX/TX NiMH, PAS 12PP, PN 12PP, PPS 12PP, PSG 12PP, PSM 12PP All TopCell batteries are made with highest quality components from Panasonic® and Sanyo®. This battery is not manufactured by Milwaukee Electric.

Read Original Review

Maximalpower PTB MIL14.4B 14.4v 2000mAh Ni-Cd Battery for Milwaukee Tools

2010-07-15T22:15:00.001-07:00

Maximalpower PTB MIL14.4B 14.4v 2000mAh Ni-Cd Battery for Milwaukee Tools

Read Original Review

Milwaukee 48-11-1815 M18 Compact LITHIUM-ION Batteries 2 Pack

2010-07-09T21:50:00.001-07:00

Milwaukee 48-11-1815 M18 Compact LITHIUM-ION Batteries 2 Pack
- This battery works great, has a good run time and quick charge time. The power gauge is awesome - lets you know roughly how much of the charge remains. Here is a more complete list of tools this battery will and will not work with:

Compact battery will run:
2601 - compact drill/driver
2602 - compact hammer drill/drill/driver
2650 - impact driver
2651 - impact wrench
2652 - compact impact wrench
2625 - hackzawl (one hand recip saw)
2790 - radio
0880 - vacuum
2735 - LED light
49-24-0171 - Xenon light
2632 - proPEX tool

Compact battery will NOT run:
2610 - high performance drill/driver
2611 - high performance hammer drill/drill/driver
2680 - cut off/grinder
2629 - band saw
2620 - sawzall
2645 - jig saw
2630 - circular saw
2662 - high torque impact wrench
2663 - high torque impact wrench
2664 - high torque impact wrench
2665 - high torque impact wrench

- The M18 Compact LITHIUM-ION Battery pack offers increased runt-time with 40% less weight than an 18V NiCd battery. Milwaukee's Digital Power Management System helps to ensure that optimal battery life and run-time is achieved, while protecting the battery and tool during the toughest jobsite applications. The 18V Compact LITHIUM-ION battery works on the following M18 tools: 2601 - M18 1/2-Inch Compact Drill/Driver; 2650 - M-18 1/4-Inch Hex Impact Driver; 49-24-0171 - M18 Work Light; 0880-20 - 18V Cordless Vacuum

Read Original Review

Milwaukee 0756-22 28-Volt Cordless V28 Lithium-Ion Compact 1-Inch SDS Rotary Hammer with Case

2010-07-06T21:45:00.001-07:00

Milwaukee 0756-22 28-Volt Cordless V28 Lithium-Ion Compact 1-Inch SDS Rotary Hammer with Case
$646.09 - it's worth the dime. that being said no cordless will be better than a corded tool. i bought it because it had the rebate for the third battery.

575. three batteries.

with a corded tool you have to drag a cord. time is money so when you need the juice plug in. when you need to move this is the tool.

3/8" & 5/8" wedge anchors, 3/8" sleeve anchors, 5/8" lead anchors, 3/16" concrete screws and 1" chipping bit. a hard piece of agragate will slow you down but if you use the correctly you will have success.

punch & dimple door frames, floor closer install and removal (not initial demo for pit bucket,) thresholds, floorstops, removable mullions. totally awesome for ones & twos...

let the hammer work for you which means you don't have to push with the force of the unstoppable. it will go thru.

when the battery dies, it dies, none of this slowly dying, it's dead. bit six inches in and it's dead. they charge fast and they are not finicky to get off like some other cordless tools.

i wouldn't use it in the rain and i would buy it agin.

hilti jus came out with a lithium version for twice the price. twice as nice? everything breaks someday. there will be a new flavor of the month next year but for right now i am not dragging two hundred feet of extension to meander around the maze of a construction labyrinth.

the bit pocket in the hardcase is stupid. it opens when you try and close the box and there is a dumb moment of close and slam that never works... the pocket is lame. just not thought out with actual use in mind.

- Milwaukee 1in. SDS rotary hammer is a powerful, compact design that is lightweight and versatile. V28 lithium-ion battery technology delivers up to twice the runtime of Ni-Cd tools and true corded power in a cordless rotary hammer. Switches easily between 3 operating modes: hammerdrill, drill and chipping. L-shaped design offers easy access to tight spaces. Cordless: Yes, Volts: 28, Rated RPM: 0 - 1,400, Torque (in./lbs.): 2.1 ft-lbs, Blows Per Minute (BPM): 4,700, Battery Included: Yes, Charger Included: Yes, Case Included: Yes

- The Milwaukee 28-Volt Cordless Li-Ion Compact 1-Inch SDS Rotary Hammer comes with a convenient storage case and features a high-power reversible motor that delivers 4,700 BPM and 2.4 ft./lbs. of impact energy. The 28-volt battery pack weighs less than an 18-volt pack, yet delivers twice the run-time, making this an ideal solution for professional-grade hammer drilling, chiseling, and drilling needs. The rotary hammer comes standard with a keyless chuck for fast, easy accessory and adapter changes. A comfortable soft-grip handle and a two-finger trigger provide ultimate operator comfort. The rotary hammer features a compact L-shaped design for maximum comfort and control, and comes equipped with a rotation stop feature for light chiseling and a hammer action stop feature for drilling. A metal gearbox is also included for added durability. The rotary hammer comes backed with a 5-year limited manufacture's warranty.

What's in the Box
Rotary hammer, two 28-volt batteries, 1-hour charger, carrying case, side handle, and depth gauge.

Read Original Review

14.40V,3000mAh,Ni-MH,Replacement Power Tools Battery for MILWAUKEE 0511-21, 0512-21, 0512-25, 0513-21, 0513-20, 0514-20, 0514-24, 0514-52, 0516-20, 0516-22, 0516-52, 0612-20, 0612-22, 0612-26, Compatible P/N:48-11-1000, 48-11-1014, 48-11-1024

2010-07-03T21:40:00.001-07:00

14.40V,3000mAh,Ni-MH,Replacement Power Tools Battery for MILWAUKEE 0511-21, 0512-21, 0512-25, 0513-21, 0513-20, 0514-20, 0514-24, 0514-52, 0516-20, 0516-22, 0516-52, 0612-20, 0612-22, 0612-26, Compatible P/N:48-11-1000, 48-11-1014, 48-11-1024
$63.40

- ***This ITEM is compatible with the following models:****[1]0511-21, 0512-21, 0512-25, 0513-21, 0513-20, 0514-20, 0514-24, 0514-52, 0516-20, 0516-22, 0516-52, 0612-20, 0612-22, 0612-26, 0613-20, 0613-24, 0614-20, 0614-24, 0615-24, 0616-20, 0616-24, 0617-24, 49-24-0150, 6562-21, 6562-23, 6562-24, 9081-20, 9081-22, 9082-20, 9082-22, 9083-20, 9083-22, [2]LokTor P 14.4 TX, LokTor P 14.4 TXC, LokTor PDD 14.4 X, LokTor S 14.4 TX, LokTor S 14.4 TXC, LoTor S 14.4 TX, PAS 14.4 Power Plus, PCG 14.4, PES 14.4 T, PIW 14.4 HEX, PIW 14.4 SD, PJX 14.4 Power Plus, PLD 14.4 X, PN 14.4 Power Plus, PPS14.4 Power Plus, PSG 14.4 Power Plus, PSM 14.4 Power Plus,

Read Original Review

Lithium Ion Power Tools Battery For Milwaukee 0881-22

2010-06-30T21:30:00.001-07:00

Lithium Ion Power Tools Battery For Milwaukee 0881-22
$53.59

- Lithium Ion Power Tools Battery For Milwaukee 0881-22

Read Original Review

Milwaukee 2601-82 Factory Reconditioned 18-Volt Cordless Compact Drill

2010-06-27T21:25:00.001-07:00

Milwaukee 2601-82 Factory Reconditioned 18-Volt Cordless Compact Drill

Read Original Review

NI-MH Power Tools Battery For Milwaukee 9083-22

2010-06-24T21:15:00.001-07:00

NI-MH Power Tools Battery For Milwaukee 9083-22
$39.19

- NI-MH Power Tools Battery For Milwaukee 9083-22

Read Original Review

Milwaukee 0928-29 28-Volt Lithium-Ion Cordless 4-Tool Combo Kit

2010-06-21T21:11:00.001-07:00

Milwaukee 0928-29 28-Volt Lithium-Ion Cordless 4-Tool Combo Kit
$629.99 - I had a set of 18V DeW*lt prior to this. They were stolen from my truck. So I started looking around for a replacement set. Like a light from above an email from Milwaukee arrived in my inbox three days later ( I had purchased and registered a Milwaukee router). The email announced the soon to arrive 28V line. It was soon so I waited just a week or so and then pre-ordered a set. Well as luck would have have it, things were delayed a bit. Apparently a battery factory burnt down so my order was delayed a few weeks so I managed.

When it arrived I was very pleased with the set. Even the light is very useful. I almost never have to use a trouble lamp any more this thing runs forever. My DeW*alt one with run down after just a short time. They could upgrade this to LED, this would be nice but not necessary.

The charger is snappy, usually has a battery ready before you expect it. The battery gauges are good too so that if one crawls across an attic or will be away from the charger you know what you have with you.

I've beat the heck out of the drill. So far the only weakness is that either the motor's rotor/contacts OR the trigger have probably pitted a bit. There are times where the variable speed needs a kick start. But I can't complain. When it gets really bad I'll see about repairs.

These tools are so very close to and in several cases exceed tools with cords.

They are not for everyone I suppose as they are not light but they keep on giving.

So thank you to the scumb bag that stole my DeW*lk kit. In the long run i'm better off.

- Milwaukee Tools is world-renowned for producing powerful, heavy-duty tools for contractors, mechanics and demanding professionals in every trade. That very same devotion to power, performance and innovation was applied when Milwaukee created the 0928-29 V28 Four-Piece Combo Kit. Included are a hammer-drill/driver, circular saw, reciprocating saw, and work light. All four tools are powered by a high-performance 28-volt lithium-ion battery that weighs less than an 18-volt Ni-Cad, yet delivers twice the run time. The battery has a handy "fuel gauge" that shows how much power remains.

The hammer-drill/driver has a 1/2-inch keyless chuck and a two-speed, variable-speed motor (zero to 600 rpm, and zero to 1,800 rpm) that delivers a pumped-up 600 in./lbs. of torque. The chuck is equipped with carbide jaws that virtually eliminate bit slippage. There’s no hole too large to drill, or screw too big to drive for this portable powerhouse. And when it’s switched to the hammer mode, this tool will quickly bore through the hardest concrete, brick or stone.

The 6-1/2-inch circular saw is arguably the most powerful cordless saw on the market. According to Milwaukee, this saw can crosscut more than 300 pine 2 by 4s on a single charge. It’s equipped with a high-speed 4,200-rpm motor that chews through wood like a corded saw.

The cordless Sawzall recip saw is an ideal tool for remodelers, plumbers, and electricians. When fitted with the appropriate blade, it’ll cut practically any building material, including nail-embedded wood, metal ducts, plastic pipe, steel rods and roof shingles. Its two-speed, variable-speed motor (zero to 2,000, and zero to 3,000 strokes per minute) lets you choose the optimum cutting speed for the material. The saw has an aggressive 1-1/8-inch stroke length, and is equipped with a tool-free blade clamp and keyless adjustable shoe. The work light comes in handy when working in dark spaces. It has a super-bright xenon bulb that runs over five hours on a single charge.

All four pieces come with the patented Clip-Lok System, which allows you to securely hook the tool onto your belt or tool pouch. Besides the four tools, the 0928-29 combo kit also includes two 28-volt lithium-ion batteries, a one-hour charger, saw blades and screwdriver tips, and an oversized canvas storage bag. -- Joseph Truini

Read Original Review

Bare-Tool Milwaukee 2610-20 18-Volt Drill/Driver (Tool Only, No Battery)

2010-02-26T19:18:00.001-08:00

Buy Cheap Bare-Tool Milwaukee 2610-20 18-Volt Drill/Driver (Tool Only, No Battery)

Buy Low Price From Here Now
Cordless - Power Drills Chuck Size: 1/2 Voltage: 18V
Readmore

Technical Details

- 18-Volt XC high capacity lithium-ion battery delivers longer life and run-time
- Milwaukee 4-Pole frameless motor maximizes tool efficiency to increase run-time
- 1/2-Inch single-sleeve ratcheting metal chuck with carbide jaws and variable speed trigger
- On-board battery fuel gauge displays remaining run-time and built-in LED light illuminates work surface
- Belt clip allows for easy portability
See more technical details

Images Product

Buy Bare-Tool Milwaukee 2610-20 18-Volt Drill/Driver (Tool Only, No Battery) Now

Bare-Tool Milwaukee 0799-20 V28 28-Volt Lithium-Ion 7/16-Inch Cordless Impact Wrench (Tool Only, No Battery)

2010-02-06T01:23:00.001-08:00

Buy Cheap Bare-Tool Milwaukee 0799-20 V28 28-Volt Lithium-Ion 7/16-Inch Cordless Impact Wrench (Tool Only, No Battery)

Buy Low Price From Here Now
Impact Wrenches, Ratchets & Nut Runners Type: V28 7/16" Quick Change Cordless Impact Wrench Type of Power: Cordless Size: 7/16
Readmore

Technical Details

- 28V Milwaukee high power motor delivers 325 Ft.-Lbs of torque
- Durable magnesium mechanism housing
- Variable speed trigger control delivers 0-1450 RPM and 0-2450 IPM
- Comfortable non-slip, soft-grip handle
- Tool only, V28 Lithium-Ion battery not included
See more technical details

"Discovering a New Utility" 2009-11-14
By William Graves (Squaw Valley California)
When I originally became aware of this tool, I asked my contractor friends, what's it good for. The answer seemed to be: 'Not much.' But obviously, someone went to a lot of trouble engineering this, so probably that answer was wrong. A quick call to Milwaukee customer service helped somewhat: 'The phone company uses them with our augers to drill telephone polls.' Well, still no reason for me to own one. Then I figured it out, the standard arbors on their larger hole saws fit this thing, then with the impact drive, you can cut holes in about anything in no time at all. So I broke down and bought one. I give it four stars because customer service doesn't know what it's for.

Images Product

Buy Bare-Tool Milwaukee 0799-20 V28 28-Volt Lithium-Ion 7/16-Inch Cordless Impact Wrench (Tool Only, No Battery) Now

Milwaukee 2471-22 12-Volt Copper Tubing Cutter Kit

2010-02-06T01:20:00.001-08:00

Buy Cheap Milwaukee 2471-22 12-Volt Copper Tubing Cutter Kit

Buy Low Price From Here Now
The M12 copper tubing cutter is specifically designed for cutting copper with the speed and versatility that plumbers, mechanical contractors and remodelers require. A 12V Li-Ion battery and ultra efficient gearing ensures over 200 cuts on a single charge. Cordless: Yes, Inside Cutting Radius (in.): 3/8 to 1, Battery Included: Yes, Charger Included: Yes, Case Included: Yes
Readmore

Technical Details

- 12-volts LITHIUM-ION battery for longer run-time
- Close quarter rotating cutting head cuts pipe-inch confined spaces
- Automatic adjustment from 3/8-inch – 1-inch tubing with Auto locking mechanism and Water resistant metal cutter head
- Ergonomic, compact, and lightweight design for operator comfort and Ultra-efficient drive mechanism delivers over 200 cuts per charge
- Battery Fuel-gauge displays remaining run-time and Built-in LED light illuminates work surface
See more technical details

"Where has this been all my life?" 2009-09-16
By Samurai Dave (Ventura, CA)
It self-adjusts to various pipe sizes. Look through a window (conveniently built into the tool head) to see exaclty where your pencil mark is on the pipe. An LED illuminates the mark to increase accuracy of your cut. Pull the trigger, and in a few seconds one pipe is two.

It is really shines when you have to cut pipe that is in place, like between studs in a finished wall. The only option used to be a Sawzall, which leaves a ragged edge that had to be dressed with a file. No more. This baby will chop it in no time, and it leaves a clean cut! I was remodeling some pipe in an attic recently and it worked like a dream.

I still keep my trusty Ridgid (manual) pipe cutter handy, but lately it never comes out of my tool pouch.

It seems pretty well built, and will stand up to lots of use. I HIGHLY recommend this tool! ;-)

"Milwaukee 2471-22" 2009-05-25
By J. G. Johnson (Somerset, KY United States)
Milwaukee 2471-22 12-Volt Pipe Cutter Kit

We bought this to try while remodeling a small grocery store. For the most part, it met our expectations well. In the bottom of and under most refrigeration cases, there is not much clearance to operate your cutter. This device worked well 3-4 times out of every 5. Sometimes it can be hard to position correctly. If it is not on the pipe just right, it will spin and spin and not accomplish anything. However, when you get it right, it is outstanding. The only change I would like to see, would be the ability to cut smaller pipe. As it ships, it can cut down to 3/8 ID(1/2 OD). In refrigeration, we use a lot of 1/4 ID(3/8 OD) and it would be outstanding if they would include this size in the capacity of the unit.

"Chinese Garbage" 2009-04-30
By Ed G. (Long Beach NY)
This thing is a huge labor saver -- until it breaks. And break it did, as did its replacement, the replacement after that and yet another replacement. In fact we went through six of them on our three trucks in 14 days!

They simply work, work, work, then one day flash all their lights and go dead.

This is the definition of CHINESE JUNK. Milwaukee customer service says "they are coming back by the thousands" and we can't argue with that.

If you want a real tool that will work more than ten or fifteen times, look elsewhere. This is a toy for your wife.

"Milwaukee 12-Volt copper tubing cutter" 2008-11-05
By Alan Haack (Hotchkiss, CO)
I have used the Milwaukee 12-volt copper tubing cutter on a couple of jobs and I can honestly say that I LOVE THIS THING! It cuts fast and clean and is a real time saver. It's great for production work, like when you've got your work bench set up and you're fitting up a boiler. It's also super handy for situations where you would normally need a close quarters tubing cutter, as it's so much faster! I'll probably continue to use my regular quick-release tubing cutter for quick jobs in the crawl space, but for lots of other work the power cutter is much faster and fun to use. It's obviously very well engineered and the quality is all you've come to expect from Milwaukee. I do wish it had come with a ballistic cloth holster that could be snapped onto your belt so it could be carried on your hip, but I guess you can't have everything. The bottom line is if you cut any amount of copper tubing on a regular basis, you're gonna want this tool. It should also be great for making your friends in the trade jealous until they decide they need to get one too!

Images Product

Buy Milwaukee 2471-22 12-Volt Copper Tubing Cutter Kit Now

Factory-Reconditioned Milwaukee 0912-89 18-Volt Ni-Cad Cordless 4-Tool Combo Kit

2010-02-01T20:28:00.001-08:00

Buy Cheap Factory-Reconditioned Milwaukee 0912-89 18-Volt Ni-Cad Cordless 4-Tool Combo Kit

Buy Low Price From Here Now

Readmore

Technical Details

- Reconditioned Milwaukee Products have a five-year warranty through the Milwaukee factory or an authorized service center
- 5 Year Manufacture Warranty
See more technical details

Images Product

Buy Factory-Reconditioned Milwaukee 0912-89 18-Volt Ni-Cad Cordless 4-Tool Combo Kit Now

Bare-Tool Milwaukee 2611-20 18-Volt Hammer Drill (Tool Only, No Battery)

2010-02-01T20:01:00.001-08:00

Buy Cheap Bare-Tool Milwaukee 2611-20 18-Volt Hammer Drill (Tool Only, No Battery)

Buy Low Price From Here Now
The 2611 Hammerdrill/driver delivers revolutionary power, run time and ergonomics. The Milwaukee 4-pole frameless motor generates a best-in-class 650 in.-lbs. of torque to meet the application rigors of the jobsite. The 2611 incorporates an easy to use 1/2in. single-sleeve ratcheting metal chuck with carbide jaws for maximum grip. Max. Torque (in.-lbs.): 650, Volts: 18, Speed - No Load (RPM): 0 - 450, Chuck Size (in.): 1/2, Keyless Chuck: Yes, Reversible: Yes, Variable Speed: Yes, Side Handle: Yes, Battery Included: No, Charger Included: No, Case Included: No, Tool Length (in.): 9 1/4, Tool Weight (lbs.): 5.3 (w/battery)
Readmore

Technical Details

- 18-Volt XC high capacity lithium-ion battery delivers longer life and run-time
- Milwaukee 4-pole frameless motor maximizes tool efficiency to increase run-time
- 1/2-Inch single-sleeve ratcheting metal chuck with carbide jaws and Variable speed trigger
- On-board battery fuel gauge displays remaining run-time and Built-in LED Light illuminates work surface
- Belt clip allows for easy portability
See more technical details

"excellent hammer and drill" 2009-08-08
By Michael Winters
The new M18 2611-20 model has some advances over prior models in all but one regard, the side handle. The new side handle design makes for a slightly more compact unit but it cannot the adjusted 360 degrees the way you could with the older V18 hammer drills. This was definitely a step backwards.

The battery life is excellent but you have to charge them until the green light on the charger lights up. There are 4 red battery charge status bars on the battery pack but when all 4 are lit up the pack is not really fully charged - a mistake I made the first time I used the drill and as a result the charge life was not very good. This is the first charge I have seen there the plug at the end is designed to still provide another plug in spot for another tool so one can plug in the charger and another device on the end of a extension cord or into a wall outlet. IBM was using this plug end 30 years ago and it was nice to see it implemented by Milwaukee's product people.

The clutch mechanism on the chuck takes some getting used to and if you try to hand tighten the chuck by applying power to the drill it will not tighten fully. The drill is designed to protect the user so it has a neutral or lock position on the trigger switch and then you can tighten the chuck which slips a bit and you can hear the clutch ratcheting (at least that is the impression as to what is happening under the covers). This lock position is required for changing from hammer to drill to screw mode with the drill.

The case is a sturdy one which I always find with Milwaukee products and wish Dewalt would follow suit instead of often making its customers spend another $40 to buy one of the cheaply built DeWalt cases. A flaw of the Milwaukee case is that the designer was being a bit too cute in making everything fit snug in its own recess and so there is no space left over for screw or drill bits or any other accessories. This is where Bosch excels with its cases for its drills and its hole saws.

This drill has a integral LED light that goes on automatically when the trigger is depressed. Until you have used a drill with this feature it is hard to appreciate how nice it is to have and and how many places it makes it easier to spot a drill location or find the head of a screw. I now buy only cordless drills with the built in LED lights, which are also found on the Bosch and Makita drills but seem to be absent with the Hitachi and DeWalt drills - even the high end lithium-ion powered models.

One place where Milwaukee follows in the misguided footsteps of Makita is in showing their drills with belt clip and bit holders and then leaving them out of their $700 retail kits. You have to contact their service department and order a belt clip, 2 screws, a washer, and the bit holder as separate part numbers and they have a $25 minimum order or a separate order processing charge in addition to the charges for shipping and handling. So the customer shells out $25 in order to save Milwaukee $0.50 in part costs for its kits. Makita does the same thing with its lithium-ion drill kits and it is a sad day when the bean counters prevail over the product managers at a company. It would be nice if Makita and Milwaukee at least provided a kit one could buy at the same store as the drill that had theses parts and charged people $5-6 and minimized the aggravation.

The hammer action works very well and appears to be a good contender with the excellent Bosch hammer drills. One thing that is missing is a depth stop which was also available on Bosch and Makita hammer drills. It is a real time saver to be able to drill to a specific depth and know it at a glance. This is another area there the new design introduced some new flaws with the tool. The best design in this regard is the one used by Bosch for its hammer drills where the depth stop is integrated into the handle so its position can rotate along with the side handle. The depth stop and the side handle is often shown in pictures of Makita hammer drills but neither are included with the drills and need to be ordered and purchased later.

The chuck on this hammer action model holds well for hammering but will loosen when using large 7/16" drill shafts with the hammer action or even with it turned off. It may be the new clutch design as I have not experienced this with other hammer drills in the past.

The drill has more torque than any other 18v cordless I have used, which includes Hitachi, DeWalt, Makita, and Bosch models. It runs relatively cool unlike the V18 models it replaces. There is a thermal and load cutoff mechanism and it can cutout when there is a heavy load even if the drill is not running hot. This is something that the Makita incorporates in some of its drills they have a switch setting for high torque work that I suspect raises the amp load threshold setting for the internal cutoff electronics. This is something that Milwaukee needs to add to the design of their drills as well.

Images Product

Buy Bare-Tool Milwaukee 2611-20 18-Volt Hammer Drill (Tool Only, No Battery) Now

TopCell ML-1822 18-Volt 2.2 Amp Hour NiCad Slide Style Replacement Battery for Milwaukee Cordless Tools

2010-02-01T19:58:00.001-08:00

Buy Cheap TopCell ML-1822 18-Volt 2.2 Amp Hour NiCad Slide Style Replacement Battery for Milwaukee Cordless Tools

Buy Low Price From Here Now
Contractor-grade batteries with great battery life and great savings! Top-performing TopCell battery gives you excellent service and is designed to fit most name-brand cordless power tools. Manufactured with Panasonic or Sanyo cells for premium performance. 10-pt. spot welded contact points allow 25% better current flow than standard plates. Impact-resistant, custom-molded case. Compatible With: Milwaukee and AEG Power Tools, Battery Amp/Hour: 2.2, Volts: 18, Battery Grade: Contractor, Impact Resistant: Yes, Dimensions L x W x H (in.): 5 1/2 x 2 3/4 x 2 1/2
Readmore

Technical Details

- All batteries are tested for maximum performance and reliability
- 12-Month limited warranty
- TopCell Batteries use only the highest quality cells (Panasonic, Sanyo)
- Superior performance at a fraction of OEM prices
See more technical details

Images Product

Buy TopCell ML-1822 18-Volt 2.2 Amp Hour NiCad Slide Style Replacement Battery for Milwaukee Cordless Tools Now

Milwaukee 0602-22 12-Volt Ni-Cad 3/8-Inch Cordless Driver/Drill Kit

2010-02-01T19:55:00.001-08:00

Buy Cheap Milwaukee 0602-22 12-Volt Ni-Cad 3/8-Inch Cordless Driver/Drill Kit

Buy Low Price From Here Now
3/8" drill driver
12 volt battery packs
clip-lok system
#2 phillips bit
Readmore

Technical Details

- High speed - 1,400 rpm for faster drilling and fastening
- 280 in.-lbs. torque for driving larger screws and drilling bigger holes
- Compact size for tight quarters
- Clip-Lok system for convenient storage and quick access
- Limited warranty
See more technical details

"I don't know what there smoking !!!" 2008-10-14
By Lee Noyes
I have been using two of these drills for a few years now and they are awesome . I don't know what these people are looking for out of a 12 volt cordless drill but they must be smoking something if they're not happy with this . This tool takes a beating and comes back for more . Great power for a 12 volter . Very comfortable for all day use .

"heavy use" 2008-07-31
By T. Richards (Virginia)
I bought this over two years ago & wanted to wait to review it. I have beaten this thing up mercilessly, including exposing it to salt water - never a total dunk, but lots of spray and splashes. No problem. I have also dropped it on concrete, in the sand, used it as a mallet, and done all kinds of other bad things to it.

My only complaints are (1)the low capacity batteries that come with the drill. They provide plenty of power - just not long enough. The replacement 2.4a.h. ones do a lot more work between charging.

(2)The belt hook is a joke, but I never use it anyway.

(3)The carrying case for this thing is a monster - big enough for three drills.

Good torque and the one-hand tightening chuck is very convenient. My outer bearings are getting a bit loose now, but given the amount of sand, mud, and plaster dust this thing has eaten in two years, I consider that OK.

"A Great Drill-Driver" 2007-02-09
By I. Kayak (CA USA)
An ideal tool for someone needing a cordless drill-driver but who isn't a house-building carpenter/contractor. Plenty of power, well-balanced and not too heavy.

"Tool vs toy" 2004-09-15
By worker jerry
Dont send a boy to do a mans job..Dissapointed in Milwakee's product for the first time. problems with chuck bearings. can not screw or drill much load. maybe a 12V drill should be called a screw gun not a drill

"Compact, Tough and Powerful!!!" 2003-12-31
By (Honolulu, Hawaii United States)
If you need a good all around cordless, this drill is highly recommended. Milwaukee has done a great job incorporating "Heavy Duty" toughness without the weight of an 18 volt bruiser! This drill is not only light but compact, nearly the size of my older Panasonic. The plastic housing is the best I have seen among cordless drills. Looks like it's built to last! The rubberized trigger and soft grip handle just adds to the balanced comfort. This drill also included a cool Clip-Lok system eliminating the need for a holster or one of those awkward lug hooks.

The power is more than adequate for most jobs. I was able to drill quite a few holes with my hole-saw during door installations. The drill does pack a pretty hefty kick with all the torque generated at 1400rpm. Luckily, there is a two speed feature to tame this beast! For me, a good 12 volt drill is perfect for most woodworking projects, the weight and extra bulk of anything greater is just not worth the fatique. Maybe I just don't have the ego for a hefty 18 or 24 volter! To me, the whole point of using cordless tools is to get away from the excess weight!

The only complaint I have on this drill is the trigger. Although, I love the rubberized feel, my finger got pinched quite a few times when I pulled the trigger. The fleshy part of my trigger finger got caught between the tacky rubber switch and the housing...Ouch! Then again, it may just be me and not the tool. All in all, this is another excellent product from Milwaukee! And a big mahalo to Larry at the Amazon/Tool-Crib for assisting with my purchase. No where on the islands was this beauty available!

Images Product

Buy Milwaukee 0602-22 12-Volt Ni-Cad 3/8-Inch Cordless Driver/Drill Kit Now

Milwaukee 0780-20 28-Volt Cordless Wet/Dry Vacuum

2010-02-01T19:52:00.001-08:00

Buy Cheap Milwaukee 0780-20 28-Volt Cordless Wet/Dry Vacuum

Buy Low Price From Here Now
The Milwaukee cordless wet/dry vacuum uses a powerful 28V motor to offer higher air power and suction to provide quick and easy removal of dust, debris and water, along with long continuous run time. Gallons: 2, CFM: 45
Readmore

Technical Details

- Works on 28-volt battery
- Powerful motor to provide strong suction and air flow
- Tool box style for easy transport and storage
- On-board accessory and hose storage
- Built-in blower port; reusable wet/dry filter ideal for both wet and dry applications HEPA rated high efficient filter
See more technical details

"Good Vacuum" 2010-01-22
By Bud
First, it should be obvious that this is a bare tool. The batteries/charger cost more than the unit. Therefore, it is good if you have other V28 tools.

Next, somewhere someone commented that this is as powerful as a corded vac. It is not. A normal shop vac is around 1000W to 1500W, and it is unrealistic to expect this little portable guy with a 1-1/4" hose to have the same power. It just isn't as powerful.

But, it has a very usable power for my intended purpose, which is to say, it has enough power to clean up a small "mess" without having to lug out a real vac. I find I'm also using it for a surprising amount of small around the house/in the car cleaning/dusting since it is so conveniently portable. The cordless portability is the reason to buy.

A major compromise between power and battery life is that the battery (a big V28 mind you) only lasts maybe 5 minutes. This is enough for a small project clean-up, but don't expect it to clean up your shop. On the plus side, it uses 1-1/4" accessories which concentrate the available suction well and which are also the standard size for home vacuum cleaners. This item does not come with a dust brush attachment which I considered a necessity, but luckily I just bought one for a regular home vac.

The hose is VERY flexible which is nice. It accordians down to a small U-shaped unit which fits into a holder on the side when not in use. If I get a chance, I'll post a pic since this was one of my questions when purchasing it. It is fairly easy to carry in one hand and vacuum with the other.

I cannot quite give it 5 stars because I think it is still a bit overpriced, and some parts like the hinges, etc., seem a bit on the cheap side and clunky to use. I cannot comment on long-term durability yet. Hope this review helps you.

"cordless vacuum and no battery supplied with unit!" 2010-01-15
By Felix X. Ramirez
the Milwaukee 0780-20 28-volt vacuum does not say in any ads, that the unit does not come with a battery. You have to buy a battery for $143.00 and a charger fo $32.00, before You can use the vacuum. there should be notations as to "Batteries, not included"

"Best cordless vac" 2009-11-30
By R. Mullins (California)
Best cordless vac I've ever used. Makes the Dust Buster and all the others seem like toys. This is a real tool and it's very smartly designed.

"Broke already?" 2009-09-21
By Davido (Ohio)
Pros:

Good suction.

Convenient.

Cons:

Kind of cheaply made.

Small collection compartment.

Pricey if you have no battery already.

BROKE! After a dozen or so uses, the thing simply quit working. Now I have to find a repair shop that will work on them. I suspect they will inform me to just buy another one.

"Milwaukee 0780-20 V28 cordless Wet/Dry Vacuum" 2009-03-17
By P. Johnson (Pengilly, MN USA)
Best yet cordless vac, tops all the DeWalt 18 volt I own. Sucks like a corded unit. I would buy it again.

Images Product

Buy Milwaukee 0780-20 28-Volt Cordless Wet/Dry Vacuum Now

Milwaukee 48-55-1490 Plastic Molded Carrying Case for 0730, 6310 and 6320 Cordless Circular Saws

2010-02-01T19:49:00.001-08:00

Buy Cheap Milwaukee 48-55-1490 Plastic Molded Carrying Case for 0730, 6310 and 6320 Cordless Circular Saws

Buy Low Price From Here Now
48-55-1490 Milwaukee V28™ 6-1/2 in. Circular Saw Carrying Case
Readmore

Technical Details

- Ideal for storing a Milwaukee cordless circular saw and its related accessories
- Designed to accommodate Milwaukee cordless circular saw models 0730, 6310 and 6320
- Helps keep everything in one spot for the job at hand
- Features rust-proof plastic
- Lightweight and impact resistant
See more technical details

"Works perfectly for it's job" 2009-04-23
By Chris G. (California)
Great design on the case. Holds my 18V cordless saw, 2 batteries, and a charger. Has a blade storage section in the bottom of the case below the saw. Even has a slot in the lid to store the available rip fence. It is deeper than you'd expect, as another reviewer noted.

1 star off for 2 things. First, the blade storage has a post molded into the bottom of the case - but the nut that screws the blades down was missing when I got it. A call to the Milwaukee tech line (their general support line had no indication of this part) got me 2 mailed out immediately. Second, unlike the sawzall and drill cases, there is no slot for the manual. Not a big deal since I don't even refer to the manual and could just chuck it, but I do prefer to keep them with the tools. Right now it's folded in half and shoved in the spare battery section.

Definitely does it's intended job.

"Almost perfect" 2009-01-04
By R. Skulavik (Lynchburg, VA)
This case for Milwaukee's cordless circular saws is almost perfect; deeper than you think by the picture (approx 11") molded very well to the V18 battery, the charger, and the saw. It has a blade nut to keep extra blades in the case under the saw. I had to deduct 1 star because Milwaukee changed the handle design from a 1-1/4 diameter 4-pinion contact (4 contact points to the case) to a 2-pinion 3/4" diameter handle. Physics tells us that a 4-pinion handle design will take more stess on the handle than the 2-pinion design given the same pinion diameter which is the case. Why did milwaukee change the design? Don't know--but the Chineese designer probably thought it was a good idea. NOT.

RS

Lynchburg, VA

"Great Case" 2008-12-03
By Everett A. Warren (Northeast PA United States)
This case is an excellent fit and protects the saw, battery, charger, and more.

I do notice that, with the V28 at least, you need to lower the cutting height before the case will close ~ not a big deal, just something to be aware of, and something that reveals the close fit needed to keep the saw from bouncing around too much on the back of a truck.

"Very nice case" 2007-02-06
By Angus (Naperville, IL)
This is another quality product from Milwaukee. Shame the review (stars) don't reflect this. The quality of this case has NOTHING to do with whether it comes in a combo pack or not.

The case is sturdy and fits the saw, 1 battery and a charger. The clasps are nice and easy to open. I have a few other brands of tools with hard cases that you need the hands of a 10 year old to be able to open. Milwaukee was smart enough to design latches that someone with larger hands can open easily.

If you dropped the cash on the saw, this is definitely worth it to protect your investment.

Images Product

Buy Milwaukee 48-55-1490 Plastic Molded Carrying Case for 0730, 6310 and 6320 Cordless Circular Saws Now

Milwaukee Replacement Part # 65780 6X19X6 BALL BRG 2 SE

2010-02-01T19:46:00.001-08:00

Buy Cheap Milwaukee Replacement Part # 65780 6X19X6 BALL BRG 2 SE

Buy Low Price From Here Now
Milwaukee Replacement Part # 65780 6X19X6 BALL BRG 2 SE
Readmore

Technical Details

- Milwaukee Replacement Part
- 2/4/2080
- 6X19X6 BALL BRG 2 SE
- Milwaukee Power Tools
- Milwaukee Replacement Part 65780
See more technical details

"not impressed" 2009-09-27
By Moshe Miller
Im someone who loves to cut the cord, but in this case Milwaukee does not impress me. I have the m12 3/8"chuck cordless drill which is really great (its a well-kept secret) And I have the m12 flashlight which is very good as well, so I figured Id like the hackzall but it cannot cut wood fast enough to be considered useful. I think its due to the short stroke depth, though. It may still be good for other materials like piping and stuff, but if your looking for a something to cut "real stuff" with then you need a full size saw and battery

Images Product

Buy Milwaukee Replacement Part # 65780 6X19X6 BALL BRG 2 SE Now

Bare-Tool Milwaukee 2320-20 M12 12-Volt Cordless 2-Beam Plumb Laser (Tool Only, No Battery)

2010-01-15T21:58:00.001-08:00

Buy Cheap Bare-Tool Milwaukee 2320-20 M12 12-Volt Cordless 2-Beam Plumb Laser (Tool Only, No Battery)

Buy Low Price From Here Now
Includes 12V Cordless M12 2-Beam Plumb Laser - 2320-20, Soft Carrying Case, Battery and Charger Not Included
Readmore

Technical Details

- M12 LITHIUM-ION Battery Pack - 70+ Hours of Run Time
- Self Leveling Mechanism - Accurate Auto Plumb Up To ¼¿¿ At 100 Feet
- Out-Of-Level Indicator - When Leveling Range Exceeds 4 Degrees
- High Powered Magnets For Easy Placement In Metal Tracking. Over Mold Sides And Grip For A Secure Grip and Added Durability
- Low Battery Indicator - LED Blinks When Under 1 Hour Of Charge Remains. On/Off Button Features Easy, One Handed Operation. -TOOL ONLY-
See more technical details

Images Product

Buy Bare-Tool Milwaukee 2320-20 M12 12-Volt Cordless 2-Beam Plumb Laser (Tool Only, No Battery) Now

Milwaukee 2694-24 M18 18-Volt Cordless Tool Combo Kit, 4-Piece

2010-01-15T21:55:00.001-08:00

Buy Cheap Milwaukee 2694-24 M18 18-Volt Cordless Tool Combo Kit, 4-Piece

Buy Low Price From Here Now
The M18 cordless 4-tool combo kit includes the 1/2in. Hammerdrill/Driver, Sawzall Recip Saw, Circular Saw and Worklight. The M18 Cordless System's patented technologies and electronics, innovative motor design, and superior ergonomics provide the most efficient blend of power, weight and performance in the industry. Tools Included: Hammerdrill/driver, Sawzall recip saw, circular saw and worklight, Storage Case Included: Yes, Volts: 18, Battery Type: M18 Lithium-Ion, Battery Included: Yes (2), Charger Included: Yes
Readmore

Technical Details

- M18 Cordless 1/2-Inch hammer drill / driver with Milwaukee 4-Pole frameless motor delivers 550-Inch-Pound of peak torque, 0-450/0-1,700 RPM and 29,000 BPM
- M18 Cordless sawzall reciprocating saw with patented gear-protecting clutch and counter balance mechanism
- M18 Cordless 6-1/2-Inch circular saw delivers 3,500 RPM with magnesium upper and lower guards for maximum durability
- M18 Cordless work light provides a fold-away hook for hands free use and a 135-Degree rotating head to direct light at the work area
- Includes: M18 2620-20 1/2-Inch hammer drill/driver, M18 2620-20 SAWZALL recip saw , M18 6-1/2-Inch circ saw, M18 work light , (2) M18 XC high capacity lithium-ion batteries, 1-Hour charger, (1)general purpose sawzall blade, contractor bag
See more technical details

"This Combo Kit is Your Best Deal" 2009-12-21
By D. Hare (Keystone State, USA)
I just purchased this combo and have had no problems with charging or batteries. If you do happen to encounter any issues and need support, either Amazon or Milwaukee will assist with an exchange or return. NO WORRIES.

Purchase this kit with confidence.

This is a great kit for the $$ and you will have the tools to tackle most any job.....all without the cords!

"These Things are Terrible!" 2009-12-11
By Michael T. Ogburn
I received the tools on a Thursday and was excited about them as I usually am when I get new tools. Put the battery on the charger figured after 30 minutes I could see how they worked. Since that's what I have seen with all of the other Li-ion battery tools. After 30 minutes nothing happened no power tried the flashlight the drill and the saw in case it was the particular tool. Then I ran to town to grab some dinner. Tried the other battery when I got back nothing happened again. Well I gave it one last shot let one of the batteries charge overnight. Again this morning nothing happened. I have had milwaukee stuff before and liked it very much. But this set is the biggest joke I have ever ordered and they are going back.

Images Product

Buy Milwaukee 2694-24 M18 18-Volt Cordless Tool Combo Kit, 4-Piece Now

Milwaukee 2420-20 Bare-Tool 12-Volt Hackzall Saw without Battery

2010-01-15T21:52:00.001-08:00

Buy Cheap Milwaukee 2420-20 Bare-Tool 12-Volt Hackzall Saw without Battery

Buy Low Price From Here Now
Reciprocating - Saws & Accessories Type: 12V Hackzall™ Reciprocating Saw Type of Power: Battery Maximum Strokes Per Minutes: 0-3000 Maximum Stroke Length: 1/2 Voltage: 12V
Readmore

Technical Details

- 12-Volt LITHIUM-ION battery offers longer run-time and fade-free performance
- Keyless QUIK-LOK Blade Clamp allows for quick and easy blade changes and All-metal gear case for added durability
- Variable speed trigger for increased user control
- Battery fuel gauge displays remaining run-time and Built-In LED light illuminates work surface
- Accepts both HACKZALL and SAWZALL style blades
See more technical details

"Underwhelming performance" 2009-10-01
By dnoyeB
I have milwaukee's small electric screwdriver. Its in this same family. It performs beautifully. Except that sometimes it will stall. I think the motor has a safety that is too sensitive, or the motor is weak. Either way the stalling is a bit frustrating but manageable.

I expected the same thing with this product, but not as bad as it is. This product stalls so badly that its barely useable. You will never cut through anything without it stalling every 5s or so. Its very frustrating. If I had to do it again I would not buy this product. I do not recommend it. I have not found any good use for this, nor have I been able to work around its deficiencies. If I were you I would simply stay away from this. Get a proper sawzall and be done with it.

"Hackzall" 2009-06-08
By A. BOOGIE
I'm an electrician. I thought this would be good for metal conduit. It's not strong enough even for 1/2 inch conduit. It overheats and shuts off. Good for thin metals and other soft materials.

"better than you think" 2009-03-13
By Rusty N. Reynolds (alaska usa)
so impressed with the 12 volt series. i needed this tool for one cut a on a job and wondered if i would ever really need it again. but i reach for it all the time. works extremely well cutting rigid foam, exhaust pipe, nails, and just about anything. it's not a 12o volt sawsall so don't expect it to be. i rate this tool at 5 stars because it's light weight,has good power, the light is extremely handy, and like the rest of the 12 volt series, it fits great in my bags.

Images Product

Buy Milwaukee 2420-20 Bare-Tool 12-Volt Hackzall Saw without Battery Now

Bare-Tool Milwaukee 0779-20 V28 28-Volt Lithium Ion 1/2-Inch Cordless Impact Wrench (No Battery)

2010-01-09T19:08:00.001-08:00

Buy Cheap Bare-Tool Milwaukee 0779-20 V28 28-Volt Lithium Ion 1/2-Inch Cordless Impact Wrench (No Battery)

Buy Low Price From Here Now
The Milwaukee 0779 28 Volt 1/2 in. Impact Wrench delivers 325 ft. lbs. of maximum torque, the most of any cordless impact wrench. Powering the 0779 is the revolutionary 28 Volt Lithium-Ion battery pack exclusively from Milwaukee. Combining high torque with 1,450 rpm and 2,450 ipm, the 0779 provides the power, speed and run-time to drive larger lags, drill bigger holes, and remove larger nuts. The powerful Milwaukee 28V motor makes breaking loose 'stuck' nuts a breeze. The heavy-duty magnesium mechanism housing provides extreme job-site durability. The 0779 comes equipped with comfortable non-slip, soft-grip surfaces that reduce vibration and fatigue. The forward/reverse shuttle is conveniently located above the variable speed switch for fast, easy access. Designed for heavy-duty use, whether driving large lag screws, anchors and bolts, drilling large holes, or removing lug nuts, the 0779 provides the power, comfort and run-time to finish the job. A heavy-duty steel ring (included) can be attached for convenient tethering when working high overhead or for raising/lowering the tool when working from a ladder or utility pole.
Readmore

Technical Details

- Revolutionary 28 Volt Lithium-Ion Technology
- 325 ft.lbs of maximum torque
- Variable Speed: 0-1450 rpm, 0-2450 ipm
- Up to 2x run-time of 18V tools
- Hanger Bracket with solid steel ring
See more technical details

"awesome impact" 2008-11-24
By Wayne Green (mid America USA)
The 28 volt Milwaukee cordless impact does all it's claimed to do and more.

I drive a race car, and this is a MUST HAVE for all racers.

It installs and removes even the most stubborn lug nuts.

The only down side is that it is pricy, but, very well worth the price!

This is one tool I would not want to be without!

"Heavy Duty" 2008-09-28
By K. Heck (PA)
I purchased this tool for heavy maintance in in a quarry (one of the harshest enviroments for a power tool) where it was not possible to take electric and air guns we have it for about 2 months and it has quickly become the favorite for all repair work even when the guys a working near an outlet the electric guns arent used anymore I am going to buy 2 more

"Awesome!" 2008-07-01
By Nicholas T. Dimarco (Marlton, NJ United States)
Already having an air compressor and air impact wrench, it was tough to convince myself to get this. I talked myself into it by thinking about how nice it would be to have an impact wrench for junkyard hunting. Anyway, I have yet to test it out in a junkyard, but since I bought this tool, my air impact tools have not seen the light of day. It is heavy, but all I can say is WOW. This thing puts my IR231 to shame in both speed and power. I would recommend this to anyone who wants real power in a cordless impact gun.

"two words, heavy and powerful..." 2008-05-21
By R. Moody (Tupelo, MS)
I picked this up after doing a brake job on my car and having to take the wheels off two times (amateur job you would say). I already own the V28 hammer drill, SawzAll, circular saw, and flashlight. All of these are very impressive tools as well. This is no lightweight, sort-of-works wrench. I used it to take my wheels off again to work on my front brakes, and it will take off and put on a lug nut in a matter of seconds. Will it handle large truck lugs, don't know, but for my purpose, work on my cars, it's just what the Dr. ordered. I have no doubt that if I needed to drive a large lag bolt or loosen a rusted bolt, it would get the job done. My only complaint is about how the ring attaches, you have to remove two screws from the gearbox to put it on. But, if that's all I can find wrong, that's a good thing because I am sort of picky with my tools having been a former aircraft mechanic. This is just another in the extremely capable V28 tool line.

"heavy hunk" 2008-04-08
By Ron PA
I have a pneumatic one so I didn't really need this but when I stumbled across it on Amazon for 100 bucks cheaper then I've ever seen: $131+freeship, my tool buying reflex took over.

It is big and really heavy compared to my pneumatic one but the convenience of complete portability is worth a lot. I quickly put it to work rotating the tires on my one-ton and though it took a couple seconds to break some lugs free, the work went quickly; no charging the compressor, uncoiling the hose or finding the pneumatic tool oil. 8 lugs per hub off and on all around only used 50% charge, though my right forearm was feeling the burn near the end. The charge rebounded to 75% later as these batteries tend to do.

I don't think I'll be bothering with the air compressor and hose anymore except to inflate tires.

*I see the product dimensions are junk; it's 12" long x 11.5" high wi. battery.

**Flat tire already, lucky me, but I also used it on the plastic hub protector lugs this time and the trigger control was excellent, no stripping.

Images Product

Buy Bare-Tool Milwaukee 0779-20 V28 28-Volt Lithium Ion 1/2-Inch Cordless Impact Wrench (No Battery) Now

Bare-Tool Milwaukee 2630-20 Bare-Tool 18-Volt 6-1/2-Inch Circular Saw (Tool Only, No Battery)

2010-01-09T19:05:00.001-08:00

Buy Cheap Bare-Tool Milwaukee 2630-20 Bare-Tool 18-Volt 6-1/2-Inch Circular Saw (Tool Only, No Battery)

Buy Low Price From Here Now
Circular - Saws & Accessories Type: Cordless Circular Saw Blade Diameter: 6-1/2, N/A mm Type of Power: Cordless RPM: 3500 Voltage: 18V
Readmore

Technical Details

- Heavy-Duty Magnesium Guards for maximum durability and On-board fuel gauge displays remaining battery charge
- Ergonomic, compact and lightweight design with soft-grip handle for operator comfort
- Electronic brake stops blade quickly and Aircraft aluminum shoe provides greater accuracy
- Includes: 18-Volt XC Circular Saw, 24T Carbide Blade
See more technical details

"new saw milwaukee m18" 2009-08-07
By L. R. Krause (owatonna, mn usa)
I received the saw today in very good condition. seller said it is new and was right it will go good with the the other miwaukee tools.

Images Product

Buy Bare-Tool Milwaukee 2630-20 Bare-Tool 18-Volt 6-1/2-Inch Circular Saw (Tool Only, No Battery) Now

Milwaukee 2692-24 18-Volt Hammer-Drill Impact Wrench Sawzall Reciprocating Saw and Worklight Combo Kit

2010-01-03T20:20:00.001-08:00

Buy Cheap Milwaukee 2692-24 18-Volt Hammer-Drill Impact Wrench Sawzall Reciprocating Saw and Worklight Combo Kit

Buy Low Price From Here Now
Includes 18V Cordless M18 High Performace Hammer Drill - 2611-21, 18V Cordless M18 Sawzall®Reciprocating Saw - 2620-21, 18V Cordless M18 1/4" Hex High Performance Impact Driver - 2650-20, 18V Cordless M18 Worklight - 49-24-0172, (2) 18V LITHIUM-ION XC Battery Pack (48-11-1828), 18V Charger (48-59-1801), Side Handle, General Purpose Sawzall? Blade, Contractor Bag
Readmore

Technical Details

- M18 High performance 1/2-Inch hammer drill/driver with Milwaukee 4-Pole frameless motor delivers 650-Inch-Pound of torque
- M18 sawzall reciprocating saw with patented Gear-Protecting clutch and counter balance mechanism
- M18 1/4-Inch hex impact with the Milwaukee 4-pole frameless motor delivers 1400-Inch-Pound of torque. M18 work light provides a fold-away hook for hands free use and a 135-Degree rotating head to direct light at the work area
- Includes: 18-Volt hammer drill/driver, sawzall saw, 1/4-Inch hex impact driver, worklight, (2) 18-Volt XC batteries, charger, general purpose blade, case
See more technical details

Images Product

Buy Milwaukee 2692-24 18-Volt Hammer-Drill Impact Wrench Sawzall Reciprocating Saw and Worklight Combo Kit Now

Milwaukee 654722 2.4-Volt Two Speed Cordless Screwdriver Kit With Two Batteries

2010-01-03T20:17:00.001-08:00

Buy Cheap Milwaukee 654722 2.4-Volt Two Speed Cordless Screwdriver Kit With Two Batteries

Buy Low Price From Here Now
Milwaukee's cordless screwdriver is a handy tool with enough punch for most screwdriving applications, in a size small enough to fit easily in a tool belt without falling out or taking up a lot of space. The tilting handle offers a better grip in higher-torque situations, and allows for working in tight spaces. The driver has two speed ranges--200 and 400 rpm--for low- or high-torque work, as well as six clutch settings that deliver from 5 to 22 inch-pounds of screw-tightening torque. This kit also comes with a 1/4-inch keyed chuck attachment for light drilling applications. While the tool has plenty of power for drilling small pilot holes--and even some countersinking--it's first and foremost a screwdriver, and not a great replacement for even a small handyman's cordless drill. The full kit includes the screwdriver, two 2.4-volt batteries, a one-hour charger, a 1/4-inch keyed chuck attachment, a four-piece bit set, and an impact-resistant carrying case that holds the lot. --Brian Trinen
Readmore

Technical Details

- Contains a cordless 2.4-volt screwdriver that can be used at operating speeds of 200- and 400-rpms
- You can also adjust the clutch to 6 different positions for optimum torque
- Designed for maximum versatility, the screwdriver weighs just over 1/2-pound and measures to 9-3/8-Inches with the handle fully extended
- The kit also includes two 2.4-volt battery packs, 120-volt AC 1-hour battery charger, 1/4-Inch chuck attachment, 4-piece driver/drill bit set, and an impact resistant case
- Limited warranty, 30-day no-risk trial
See more technical details

"Cordless screwdriver" 2009-11-04
By Patsy L. Alexander
I have to say, this is one of the best screwdrivers I've gotten yet. In fact, i bought it used, and the battery is still in great shape. It has lots of power, and it lasts forever in one battery charge. Great for doing round the house jobs, as it fits in almost any tool-belt or box. The best part is how it can be straight OR folded. This allows for easier access for hard to reach areas.

"Best Cordless Screwdriver I've Owned" 2009-06-15
By Robert White (Santa Rosa, CA USA)
I bought mine over twenty years ago for my electronic repair shop. I used it daily to disassemble and reassemble stereo systems, car stereos, and TV sets. It had enough power to handle almost everything. If it needed a little help, I turned it like a screwdriver to add some more torque. Now that I'm retired, I don't use it as much. It is still on the original battery and charger after all these years. Best tool I ever bought. It is not for large screws that require a lot of torque, but in my business, I rarely needed it. If I did, I got out my big manual screwdrivers.

"Superb tools for over 10 years" 2009-06-15
By Carl E (N.J.)
I've used this model 2 speed for over 10 years it's in my tool box and is always ready, the nicads hold a charge seemingly forever, I think I am only on the 2nd replacement battery after all these years. It's a perfect tool for all panel screw removal on teh stuff iI work on. It's been dropped stuffed in teh toolcase, left in teh trunk hot cold colder hotter and it just keeps on going, super quality, and when ya find teh best prices it's even better, the price varies depends on where ya buy it. The Pansonic or Bosch or AEG versions ( I bet they come from the same factory, change teh color) are usually way over priced. The MILWAUKEE is the way to go. I always buy MILWAUKEE, they are teh best. And the bigger stuff is still made here. But I guess, the lower cost stuff needs to be offshore for competitive reasons, otherwise it would be out of the range for pricing, if ya have to pay a living wage. Look at FEIN stuff very pricey, great stuff, but still made in Geramny, so the price is up there, but it is another great tool maker.

"It was a good tool for many years" 2009-02-24
By Mike G (California)
My company bought one of these many years ago. The first battery and charger lasted for years with no complaints. Eventually i had to get a couple new batteries and they didn't last for more than a couple months. Then the charger stopped charging and only lasted a couple months. I think when they first started making them the batteries and the charger worked good but the quality went south. the company bought me several batteries and 4 chargers.

The screwdriver itself is bullet proof. I now have 4 batteries, 2 non-functioning chargers and two screwdrivers.

I am at odds whether to buy another charger. I've read they have a new charger that goes to trickle when fully charged. It makes me think that the chargers were over charging the batteries and they (the chargers were burning up because one i have is bulging. With the two screw drivers and 4 batteries i have i'm still debating whether I'm going to buy one of the new chargers because i enjoyed the tool so much when i first got it.

"Great Cordless Screwdriver" 2009-01-29
By Scrappy (Hon, Hi)
This is my second set of this drill. My first set lasted a good 4-5 yrs of everyday use before a I needed to buy a new battery. And that batt lasted me a good 5-6 yrs of occasional use before I had to but another one. But this time I wanted to try a non-OEM batt which I got at a really good price (2 for the price of 1). Now, while using the non-OEM batt for the last 7-8 months my charger finally died. I was planning to purchase just the charger, but my other half said she was willing to purchase the whole set for me.

I love this screwdriver. I can't used the one my work provides for us. It's too BIG and HEAVY for constant use. The Milwaukee Cordless Screwdriver is very light and portable and I would recommend it to anyone.

Images Product

Buy Milwaukee 654722 2.4-Volt Two Speed Cordless Screwdriver Kit With Two Batteries Now

Milwaukee Tools #48-59-1801 18V Li-Ion Charger

2010-01-03T20:16:00.001-08:00

Buy Cheap Milwaukee Tools #48-59-1801 18V Li-Ion Charger

Buy Low Price From Here Now
M18, 18V Lithium-Ion Battery Charger Is A 1 Hour Charger, The Pass-Through Plug Design Provides Added Outlet Availability, Charges All Of Milwaukee's Newest Line Of M18 Tools.
Readmore

Technical Details

- Milwaukee Tools #48-59-1801 18V Li-Ion Charger
See more technical details

"18 v charger" 2009-12-21
By Ernest J. Lamadrid (phoenix)
maybe i missed where it said it would be out of it's original packaging but overall i am pleased

"great vendor" 2009-11-30
By Brad Bauer
I had tried locally to get this battery charger, even going to 2 nationally Home Improvement stores that carry Milwuakee products and they did not have the charger. I got online to Amazon and this vendor shipped it right out in no time. Wonderful addition to the Amazon family.

"GREAT CHARGER" 2009-06-04
By T. Uptegrove (Gresham, OR)
THE LAST GUY SHOULD HAVE READ THE PRODUCT DESCRIPTION!!!!! THE CHARGER IS FOR "M-18" BATTERIES, NOT "V-18". THE ADD SHOULD REALLY BE A LITTLE MORE DESCRIPTIVE, AS V-18 AND M-18 ARE NOT INTERCHANGEABLE. V-18 AND THE OLD NICADS ARE, BUT NOT M-18. NO REASON TO GIVE A 1 STAR AS THE CHARGER WORKS GREAT FOR THE RIGHT BATTERY

"be careful!!!!!!!" 2008-11-20
By Dan Briggs (CA, USA)
This might be a Lith-Ion charger, BUT it fits only the 1/2 size L/I battery, NOT THE full size that is also compatible with the NiCad type slides on 12-18 tppls.. BUY AT YOUR OWN RISK Milwaukee doesn't care......

Images Product

Buy Milwaukee Tools #48-59-1801 18V Li-Ion Charger Now

Milwaukee 2691-24M 18-Volt Compact Drill, Sawzall Reciprocating Saw, Circular Saw, and Worklight Combo Kit with Free Impact Driver

2010-01-03T20:13:00.001-08:00

Buy Cheap Milwaukee 2691-24M 18-Volt Compact Drill, Sawzall Reciprocating Saw, Circular Saw, and Worklight Combo Kit with Free Impact Driver

Buy Low Price From Here Now

Readmore

Technical Details

- M18 6 1/2-inch Compact Drill/Driver Delivers 400 In-lbs of Torque and is Only 7 3/4-inches Long.
- M18 Sawzall Reciprocating Saw with Patented Gear-Protecting Clutch and Counter Balance Mechanism.
- M18 6 1/2-inch Circular Saw Delivers 3,500 RPM with Magnesium Upper and Lower Guards for Maximum Durability.
- M18 Work Light Provides a Fold-Away Hook for Hands Free Use and a 135-Degree Rotating Head to Direct Light at the Work Area.
- Includes: 18-volt Compact Drill/Driver, Sawzall saw, Circular Saw, Worklight, (2) 18V XC Batteries, Charger, 24T Carbide tipped blade, Rip Fence, Wood blade, Metal blade, Case
See more technical details

"Great Combo Kit" 2009-02-21
By Dave
I haven't used these tools non-stop since i bought them, but from what i have used they are great. battery life is great, the impact driver has almost too much torque, and everything is light and high-quality. Much nicer than the ryobi set that i had.

"Best combo kit" 2009-02-04
By M. Brillman
I got the product very quickly and everything was in pristine condition. All tools are working to the very high standards that Milwaukee has. I have already recommended this to several people. Milwaukee makes the best tool out there and the free driver is a 250 dollar tool in itself. Best deal around!!

"Milwaukee 2691-24M" 2009-02-01
By Go Nuts! (Chicago, IL)
This is great product for anyone looking to do home repairs and commercial work. I've had dewalt 12 volt nicad and they don't even compare to the power of the M18 and weight comparison. I would have bought the one with the hammer drill but, it had gone up in price. For $435: new milwaukee design, free impact, free shipping, and free rebate for XC battery (which I recieved promptly in about 3 weeks) whats not to love about it.

"Exceptional tools at a great price" 2009-01-21
By M. Bender (Ewing, NJ United States)
I purchased this set of tools about a week ago, after spending over a month researching competing products from Makita, DeWalt, etc. I am exceptionally pleased! They are all well-designed, perform well, and are relatively lightweight. I am especially pleased with the design of the batteries, and the thoughtful touch of the power meter directly on them. Plus a five-year warranty on both the tools and the batteries! Overall this set is exceptional, and a steal at this price.

"BE CAREFUL........." 2008-12-27
By Dan Briggs (CA, USA)
Thwew nwq atylw 18v lith ions ARE NOT the same as the V18 lith ions n 18v NiCads.......different slide mount does not fit all existing tools....shame on Milwaukee........

Images Product

Buy Milwaukee 2691-24M 18-Volt Compact Drill, Sawzall Reciprocating Saw, Circular Saw, and Worklight Combo Kit with Free Impact Driver Now

Milwaukee 0615-24 14.4-Volt Ni-Cad 1/2-Inch Cordless Drill/Driver Kit

2009-12-26T19:58:00.001-08:00

Buy Cheap Milwaukee 0615-24 14.4-Volt Ni-Cad 1/2-Inch Cordless Drill/Driver Kit

Buy Low Price From Here Now
U.S.A. Max. Torque (in.-lbs.): 460, Volts: 14.4, Speed - No Load (RPM): 0-500/0-1700, Chuck Size (in.): 1/2, Variable Speed: Yes, Side Handle: Yes, Battery Included: Yes (2), Charger Included: Yes, Case Included: Yes
Readmore

Technical Details

- 460 in-lbs of maximum torque
- Soft Grip Ergonomic Handle for improved comfort and control
- Patented Reversible Battery ¿ allows drill to fit in tight areas and optimizes balance while working overhead.
- Clip-Lok Belt-Clip ¿ frees up both hands for work positioning
See more technical details

"Test Maint." 2009-10-13
By T. Anys (Michigan)
It's a milwaukee, need I say more. Excellent quality, maybe a little heavier than some, but you pay with a little more weight, for the long term durability.

Images Product

Buy Milwaukee 0615-24 14.4-Volt Ni-Cad 1/2-Inch Cordless Drill/Driver Kit Now

Bare-Tool Milwaukee 9083-20 1/2-Inch 14.4-Volt Ni-Cad Cordless Square Drive Impact Wrench (Tool Only, No Battery)

2009-12-25T00:08:00.001-08:00

Buy Cheap Bare-Tool Milwaukee 9083-20 1/2-Inch 14.4-Volt Ni-Cad Cordless Square Drive Impact Wrench (Tool Only, No Battery)

Buy Low Price From Here Now
Cordless: Yes, Max. Torque (ft.-lbs.): 117, Impacts Per Minute (IPM): 2,500, Drive (in.): 1/2, Speed - No Load (RPM): 2,200, Reversible: Yes, Amps: N/A, Volts: 14.4, Battery Included: No, Charger Included: No, Case Included: No
Readmore

Technical Details

- Powerful - Delivers up to 1,400 in. lbs. of torque
- Lightweight - allows the user to work longer with less fatigue
- Durable - equipped with a heavy-duty, die-cast, aluminum gear housing for extreme durability
- Hard hitting - produces up to 2500 impacts per minute
- Limited warranty
See more technical details

Images Product

Buy Bare-Tool Milwaukee 9083-20 1/2-Inch 14.4-Volt Ni-Cad Cordless Square Drive Impact Wrench (Tool Only, No Battery) Now

Factory-Reconditioned Milwaukee 0925-84 18-Volt Ni-Cad Cordless 4-Tool Combo Kit

2009-12-23T00:58:00.001-08:00

Buy Cheap Factory-Reconditioned Milwaukee 0925-84 18-Volt Ni-Cad Cordless 4-Tool Combo Kit

Buy Low Price From Here Now

Readmore

Technical Details

- Reconditioned Milwaukee Products have a five-year warranty through the Milwaukee factory or an authorized service center
- Drill has 495 in-lbs of maximum torque
- Sawzall - the Hatchet® features a six position pivoting handle
- Metal Saw has clear guard to provide an excellent line of sight
- Clip-Lok Belt-Clip frees up both hands for work positioning
See more technical details

"NiCads suck.........." 2009-06-28
By Dan Briggs (CA, USA)
BUY DeWalt / Makita / Bosch you will be much happier. Milwaukee batteries suck, I have trashed 7 of these NiCads, they are worthless.

The other brands seem to have better batteries and capatability than Milwaukee. I know the DeWalt NiCads work about the same as Milwaukee

V or M series Lith Ions.........

Images Product

Buy Factory-Reconditioned Milwaukee 0925-84 18-Volt Ni-Cad Cordless 4-Tool Combo Kit Now

Milwaukee 0924-24 18-Volt Ni-Cad Cordless 4-Tool Combo Kit

2009-12-22T19:38:00.001-08:00

Buy Cheap Milwaukee 0924-24 18-Volt Ni-Cad Cordless 4-Tool Combo Kit

Buy Low Price From Here Now
[0924-24] Upc: 045242002849 15L X 18W X 21H 33 Lb
Readmore

Technical Details

- Drill has 495 in-lbs of maximum torque
- Sawzall - the Hatchet® features a six position pivoting handle
- Metal Saw ¿ has clear guard to provide an excellent line of sight
- Clip-Lok Belt-Clip ¿ frees up both hands for work positioning
See more technical details

"Junk" 2009-12-01
By John Samadi (Florida)
If I could give it a zero star, I would. I have the entire set in almost new condition with no batteries, that died before much use. I'll try to find a buyer.

"great tools.....BAD BATTERIES" 2009-02-09
By Dan Briggs (CA, USA)
Milwaukee 18 v NiCads suck. Buy the set as Lith Ion u will be MUCH happier

Images Product

Buy Milwaukee 0924-24 18-Volt Ni-Cad Cordless 4-Tool Combo Kit Now

Milwaukee 2490-24 12-Volt Compact Drill, Hackzall Saw, Pipe Cutter, and Worklight Combo Kit

2009-12-17T23:19:00.001-08:00

Buy Cheap Milwaukee 2490-24 12-Volt Compact Drill, Hackzall Saw, Pipe Cutter, and Worklight Combo Kit

Buy Low Price From Here Now
When it comes to power, speed and portability in a smaller package, nothing beats the M12 system of cordless tools from Milwaukee Tool. This innovative series of cordless tools are precisely scaled to deliver the power, speed or torque required for professional applications, and they fit neatly into your tool pouch. Tools Included: Hackzall, Subcompact Driver, Tubing Cutter, and Flashlight, Storage Case Included: Yes, Volts: 12, Battery Type: M12, Battery Included: Yes (2), Charger Included: Yes
Readmore

Technical Details

- M12 ¼¿ Hex Screwdriver delivers 150 in-lbs of torque with a 15 position clutch and 0-500 RPM for fast driving.
- 12V Sub-compact Driver, Hackzall Saw, Pipe Cutter, Worklight, (2) Batteries, Charger, Contractor Bag, Phillips bit, Metal blade, Wood blade
See more technical details

"A lightweight alternative to higher voltage cordless tools." 2009-12-02
By Hank Wegener (B'ham, AL)
I would not trade in my old 18 volt Milwaukee cordless tools, but there are many times I need to get in a tight space or just don't need the extra power (with the extra weight that goes along with it). This set is great for that. The lithium ion batteries are great in that they have the gauge, but when they quit that is it. With the old NiCads you could get that last screw in maybe w/o having to grab another battery.

"Excellent purchase" 2009-03-25
By D. Gordon (Upstate NY)
Great combo of tools. Small but tough. All sorts of uses. Great battery life. Have used it tons already. A must-have for the do-it-yourselfer.

Images Product

Buy Milwaukee 2490-24 12-Volt Compact Drill, Hackzall Saw, Pipe Cutter, and Worklight Combo Kit Now

Milwaukee 2611-24M 18-Volt Hammer Drill with Free Impact Driver

2009-12-15T19:41:00.001-08:00

Buy Cheap Milwaukee 2611-24M 18-Volt Hammer Drill with Free Impact Driver

Buy Low Price From Here Now

Readmore

Technical Details

- 18V XC High Capacity LITHIUM-ION battery delivers longer life and run-time
- Milwaukee 4-Pole Frameless Motor maximizes tool efficiency to increase run-time
- ½” single-sleeve ratcheting metal chuck with carbide jaws and Variable speed trigger
- On-board Battery Fuel Gauge displays remaining run-time and Built-in LED Light illuminates work surface
- Belt clip allows for easy portability
See more technical details

"Just what I was looking for" 2009-03-13
By D. Stewart (Rowley, MA)
I bought this combo because I needed a good cordless hammer drill. I don't really need another impact driver, but at the price I paid it's a nice bonus. My first project involved drilling about 80 holes in a brick wall for tapcon screws. This drill was easily up to the task. It has good balance, a well designed hand grip that feels good in my hand and plenty of power to get the job done. I also like the way the controls are set up. For instance, you can change from driving screws to hammer drill mode without having to change the clutch setting. I compared the Milwaukee to the Makita and the new Bosch and for me the Milwaukee seemed to be the best designed and built.

"Power drill..poor battery" 2008-12-25
By Mitchell (Barbados)
The drill itself has lots of power..so does the impact...but the battery...would give me 10 maybe 12 3/16 thick holes approximately 3" deep and that the most... from the time u bore the first whole the battery is down a bar

As i said good powerful machines..battery life useless

i've worked the makita LXT BHp451 much better life and endurance..

Images Product

Buy Milwaukee 2611-24M 18-Volt Hammer Drill with Free Impact Driver Now

Milwaukee 48-11-1024 14.4-Volt 2.4 Amp Hour NiCad Slide Style Battery

2009-12-14T19:24:00.001-08:00

Buy Cheap Milwaukee 48-11-1024 14.4-Volt 2.4 Amp Hour NiCad Slide Style Battery

Buy Low Price From Here Now
14.4V, 2.4A Hour Battery, Use With Any Milwaukee Tool Or Accessory Using The Power Plus Style Batteries.
Readmore

Technical Details

- 2.4 amp hour capacity for longer run time
- No memory effect - Full battery capacity is always available
- Ni-Cad battery
- For use with Milwaukee 14.4 volt cordless tools
See more technical details

"Milwaukee 14.4 volt battery" 2009-10-14
By J. Shufelt (Central PA, USA)
This new battery works fine - now we just need to see how long it will last!

"Great battery" 2009-09-22
By R. Curtis
This battery is more than I expected. It has a higher ammount of amp hours(2.4) than the original and lasts much longer.I am pleasantly surprised.

"NiCad MUCH stronger than original" 2009-04-11
By Stellarg (Erie, PA)
Nearly bought a new lithium ion drill-driver/flashlight kit but saved about $180 to rejuvinate what I thought was a hopeless situation. 10 year old Milwaukee 3/8" drill-driver works as well as when new...even better with the 2.4 Amp battery. Originals died because I let run on flashlight until dead thinking I was 'exersising' it for longevity...but learning too late that method will ruin the battery. I have used occasionaly for 11 years, and hated to part with excellently performing drill and good flashlight. I purchase this battery as a last resort; charges on the original charger and seems to last 4x longer than the original battery (1.8 Ah). Pricey but worth it!

"Doesn't hold a charge" 2009-03-01
By John Dow (Indian Head, MD USA)
I tried to take care of the batteries for two years, by not leaving them in the charger for more than it took to charge them up, just charging them up when I used them, not over-discharging them. But they both stopped holding a charge after less than two years. When they're new the drill works great.

"Great Product" 2009-01-15
By Barbara V. Peterson (Valencia, CA)
Nice OEM battery at a good price. Holds a good charge and recharges fast. Fast shipping was a plus

Images Product

Buy Milwaukee 48-11-1024 14.4-Volt 2.4 Amp Hour NiCad Slide Style Battery Now

Milwaukee 48-11-2230 18-Volt 2.4 Amp Hour NiCad Slide Style Battery

2009-12-12T05:58:00.001-08:00

Buy Cheap Milwaukee 48-11-2230 18-Volt 2.4 Amp Hour NiCad Slide Style Battery

Buy Low Price From Here Now
Power Plus, 18V, 2.4A Reversible Battery, Provides Longer Run Time, Fits Milwaukee Model #6515-27, 5361-24, 3109-24, 0522-24, 0524-24, 0521-21, 0521-22, .0522-20, 0522-21, 0522-22, 0522-25, 0523-20, 0523-22, 0524-20, 0524-22, 3, 1109-21, 1109-21, 3109-21, 5361-20 & 5361-21.
Readmore

Technical Details

- Milwaukee 18-volt Ni-Cad battery; no memory effect--full battery capacity always available
- For use with all 18-volt Milwaukee tools (excludes models 1108, 3108, 5364, and 6516)
- Rugged plastic shell
- 1 battery pack; charger not included
- 2.7-pounds; 5-year warranty
See more technical details

"good but not great,best battery milwaukee makes" 2009-11-07
By Fred E. Parker (boston ma)
its a good battery but not as good as others, that being said the drill is great the weak part is the battery,i own 6 other cordless best tool but low end battery

"Revived Milwaukee 14.4 Volt Battery" 2009-10-17
By Revolting (Moorestown, NJ)
The 9-volt battery jump-start worked on my Milwaukee NiCad battery like a champion. This little trick saved me the expense of a new battery and it is wonderful. I had two batteries that came with the original purchase and have purchased two more since I have owned the Drill Driver. I am a thrifty type Yankee so I never throw any thing away until I am convinced that all hope is gone. So now, thanks to DB I'll have 4! Functional batteries! Almost better than Christmas, its tax free and legal to boot.

Actually, I was planning to make a drawing and submit it to Digi-Key to have some cells configured for the battery casings as replacements but now I can procrastinate a little longer. Has anyone gone to the trouble to do this him or herself? I see some web sites that do exchanges but was put off by the shipping expense.

I'm not an EE so I'm wondering why not just go all the way and do it with lithium-Ion cells using the same charger. Any comments on that

"I have three Milwaukee drills without batteries" 2009-09-19
By John Samadi (Florida)
The 18v NiCad was the worst of all. After it stopped getting charged, opened it, the cells had leaked and the terminals rusted. No hope of bringing it back. I am in the market for a new 18v cordless but no brand has impressed me yet. The three drills(two 14.4v and one 18v- almost new as the two batteries died in about one year after I purchased them) have been great but no batteries, the worst in the world. Bye Bye Milwaukee!!

"Oldie but goodie" 2009-09-17
By Kurt H. Wisner (Michigan)
Non Li-io batt. . fits the bill for my 18v at a much lower cost . Good buy, Good bye

"Milwaukee battery" 2009-09-14
By C. Tierney
Per our Plant Director the batteries were fine and half the price. Ordering was easy and batteries were shipped on time.

Images Product

Buy Milwaukee 48-11-2230 18-Volt 2.4 Amp Hour NiCad Slide Style Battery Now

Milwaukee 2694-22 M18 18-Volt Cordless 2-Tool Combo Kit

2009-12-12T05:57:00.001-08:00

Buy Cheap Milwaukee 2694-22 M18 18-Volt Cordless 2-Tool Combo Kit

Buy Low Price From Here Now
The 2694-22 M18 cordless 2-tool combo kit includes the 1/2" Hammer Drill/ Driver (2602-20) and Sawzall® Recip Saw (2620-20). The M18™ Cordless System's patented technologies and electronics, innovative motor design, and superior ergonomics
Readmore

Technical Details

- M18 Cordless ½" Hammer Drill / Driver with Milwaukee 4-Pole Frameless Motor delivers 550 in-lbs of peak torque, 0-450/0-1,700 RPM, & 29,000 BPM
- M18 Cordless Sawzall® Reciprocating Saw with Patented Gear-Protecting Clutch and Counter Balance Mechanism
- Includes: M18 2620-20 1/2" Hammer Drill/Driver, M18 2620-20 SAWZALL ® Recip Saw , (2) M18 XC High Capacity LITHIUM-ION Batteries, 1-Hour Charger, (1)General Purpose SAWZALL® Blade, Contractor Bag
See more technical details

Images Product

Buy Milwaukee 2694-22 M18 18-Volt Cordless 2-Tool Combo Kit Now

Milwaukee 48-11-0100 2.4-Volt 1-1/3-Amp Hour NiCad Stick Style Battery

2009-12-11T21:16:00.001-08:00

Buy Cheap Milwaukee 48-11-0100 2.4-Volt 1-1/3-Amp Hour NiCad Stick Style Battery

Buy Low Price From Here Now
Battery Pack For 2.4 Volt Cordless Tools Fits Models 6539-1, 6540-1 & 6546-1, 1 Hour Fast Charge
Readmore

Technical Details

- 1-1/3-amp hour stick-style battery
- No memory effect-full battery capacity is always available
- Ni-Cad battery
- For use with Milwaukee 2-2/5-Volt cordless tools
- Features 10-hour fast charge
See more technical details

"Good value -- poor longevity" 2009-01-06
By Ken Mckenzie (Lafayette, CA United States)
This is the 3rd battery I've purchased from Amazon. They do the job well enough but they don't last as long as I would like. Like all NiCads they self discharge over several weeks but I expected that they would not die in under 5 years. Instead, they all seem to go after 3 years. I'd be really unhappy if I was paying $30 each (full price). I'd love to be able to upgrade to NiMh or Lithium but I can't find them here.

"Typical Nicad" 2008-11-03
By Duffer. (Conyers, GA United States)
This is a typical nicad battery that is as lame as most nicads. I bougt it because I could not find a quality battery for my Milwaukee screwdriver and this was the only one available. Darn shame but next time I buy a screwdriver it won't have a nicad battery.

"Rechargable NiCad Battery" 2008-08-01
By D. Lavry
We use these in our manufacturing operations and they last for several days. We have backup batteries on charge so we are never without power. They hold a good charge under heavy use for at least two years.

"Good Battery at a great price" 2007-11-03
By Cheryl R. Crouse (Lewiston, ID)
What's to say? I received a good battery for a great price and I got it in a timely fashion.

"battery review" 2007-08-31
By Michael Bercun
batteries are a standard product, came in a standard package and were shipped in a timely manner

Images Product

Buy Milwaukee 48-11-0100 2.4-Volt 1-1/3-Amp Hour NiCad Stick Style Battery Now

Milwaukee Tools #48-11-1815 18V Li-Ion Battery Pack

2009-12-11T21:15:00.001-08:00

Buy Cheap Milwaukee Tools #48-11-1815 18V Li-Ion Battery Pack

Buy Low Price From Here Now
18V Compact Lithium-Ion Battery Pack, Offers Increased Run-Time With 40% Less Weight Than An 18V NiCad Battery, Milwaukee's Digital Power Management System Helps To Ensure That Optimal Battery Life & Run-Time Is Achieved, While Protecting The Battery & Tool During The Toughest Jobsite Applications, Battery Fuel Gauge, Displays Remaining Run-Time.
Readmore

Technical Details

- Milwaukee Tools #48-11-1815 18V Li-Ion Battery Pack
- MILWAUKEE ELEC TOOL
See more technical details

"Replacement for Milwaukee battery pack" 2009-09-12
By Blue Lion (Louisville, KY)
Milwaukee is a great brand name, and I love my drill. This battery pack is light, and is a great replacement for an old pack.

"Great battery for home or light work use" 2009-04-10
By K.C. (Long Island,NY)
First of all, the new M18 batteries are not compatible with the older 18V version tools. That being said, let's move along. This battery is just fine for working around the house or light construction. It is lighter weight than the M18XC batteries. If you want a work horse battery, step up to the M18XC batteries. By the way, Dan's an idiot. Pay no attention to his reviews. He is an overpriced DeWalt fan boy that is screwing up the ratings on Amazon.

"Awesome Battery" 2009-01-14
By J. Clark
This Li-Ion battery is a godsend. It's very light and compact and provides remarkable power. The wonderful thing about Li-Ion batteries is you get almost full power until it dies. Recharges fast and doesn't have a "memory" like other batteries so you can charge it up again before it's discharged. This battery also has a test button so you can see how much charge is left.

Note, this battery only fits Milwaukee COMPACT drill/drivers and impact wrenches Milwaukee 2691-22 18-Volt Compact Drill and Impact Wrench Combo Kit. I own the drill/driver for small tasks like driving screws and drilling small holes. I use it 80% of the time. Awesome tool. The other 20% of the time I use the Milwaukee 28volt drill/driver Milwaukee 0724-24 V28 Lithium-Ion 1/2-Inch Cordless Hammer Drill/Driver Kit. It's unbelievable for bigger tasks.

"not the real "18V"" 2008-12-08
By Dan Briggs (CA, USA)
This compact battery is not the 3ah battery that fits EXISTING 18 v NiCad or LI batteries. IT HAS A DIFFERENT MOUNT. Only fits new tools designed to take the smaller battery. Buy DeWalt their NiCads work and fit all their 18v tools!!!!!!!

Images Product

Buy Milwaukee Tools #48-11-1815 18V Li-Ion Battery Pack Now

Bare-Tool Milwaukee 0856-20 18-Volt Cordless Compact SDS Rotary Hammer Drill (Tool Only, No Battery)

2009-12-02T02:31:00.001-08:00

Buy Cheap Bare-Tool Milwaukee 0856-20 18-Volt Cordless Compact SDS Rotary Hammer Drill (Tool Only, No Battery)

Buy Low Price From Here Now
A compact, lightweight and highly ergonomic rotary hammer, the 0856-20 is ideal for drilling small to medium diameter holes (5/8" or lower).
Readmore

Technical Details

- All metal gear box
- Compact, lightweight L-Shape design provides easy access to tight spaces and extended user comfort
- Three modes of operation Hammer Drill / Drill / Chipping
- Robust clutch maintains stiffness to provide necessary torque
See more technical details

"Bare-Tool Milwaukee 0856-20 18-Volt Cordless Compact SDS Rotary Hammer Drill (Tool Only, No Battery)" 2009-11-03
By Tu Lam (CA USA)
I bought this because I have the batery and the charger for it already. The shipment was on time. The SDS Rotary Hammer work very good. I would recomended to anyone that needed this tool for the home remodeling.

"Incredible!" 2009-09-06
By Stephen Cunningham (Northern Michigan)
This is one incredible tool. Mine came with a adjustable stop rod that is not shown in the picture. It is built into the side handle and requires no tools to adjust its length, just press on the spring loaded release and adjust the rod to the desired position or remove it if it is in the way. I use this tool to replace a much heavier corded model for doing overhead work. I am installing new drywall in a very old house that had plaster over plaster board wall construction. I have removed the plaster and plaster board on the exterior walls to facilitate the installation of insulation and modern wiring. The underlying structure wasn't exactly designed for drywall. For instance the top plates were not aligned. The top 2x4 plate protruded into the room ½ to ¾ of an inch in some areas making it impossible to install the drywall with a square corner. I used a sharpened flat chisel blade and the hammer mode to quickly cut off the excess material using the lower top plate as a guide. Other than a flush cutting circular saw I can't think of a tool that would have done this job any better, and it is probably safer than using a flush cutting circular saw overhead.

I love this tool. It is strong and compact. It uses my old ni-cad 18 volt batteries as well as my new V-18 Lithium batteries. I bought mine from Tool King at a compettive price and it arrived in the original Milwaukee "bare tool" box along with the product registration paperwork.

One vendor shipped the last tool Milwaukee tool I bought from them in a plain brown box, no Milwaukee packaging and didn't include the operational part of the tool (the metal cutting blade) even though the product description stated it was included, and when I asked them to send it they just said no, ship it back at my expense if I wasn't happy and pay the restocking fee. The entire process set my building project back several weeks. You can read my review of the Milwaukee metal cutting circular saws to get the full story (and be sure to look at the pictures), Amazon did compensate me some of my cost of returning the item but not all of it. Perhaps your results may be better but it has been my experience that some of these vendors are just a little better than others. It cost me a couple of bucks to figure out that the lowest priced vendor isn't always the best choice. I have purchased a lot of tools from many vendors and have always had exceptional service except for my one bad experience. I will pay a couple of dollars more for the product and a couple of dollars less for the shipping and buy from a Vendor like Tool King to get the genuine original Milwaukee packaging and first rate customer service. When I purchased my Milwaukee SDS cordless drill from Took King the total cost of the product and shipping was less than $5 more than the lowest priced vendor.

I have uploaded a picture showing the adjustable stop rod that came with my drill.

Please take the time to vote if you find this review helpfull.

"Great Deal and a great drill!" 2009-09-01
By P. T. Sano (Wynantskill, NY)
This might well be the neatest battery operated drill one could ever own. This drill from Milwaukee might be as useful to the end user as it is hard to find. The drill is one of many in the Milwaukee line that are seemingly being sold off at discount prices to clear the shelves of their older 18volt technology. I found it quite cool that this tool would not only operate with the newer 18 volt lithium batteries but also with the older nicad batteries. It has a clutch that allows for drilling, hammer drilling, and hammer only. I must say that when I first took it out of the box, I installed one of my SDS chisels from an electric chipping hammer that I own. I noticed that the bit was sitting off center. Only then did I consult the directions and found that there is a setting on the clutch that allows you to turn the chuck 360 degrees until it is in the location that you want...To me, that is quite cool!! Using the drill in hammer mode was impressive to me considering that it is a cordless tool. Granted it is not going to challenge the performance of my Hitachi or similar electric hammers, but for light chipping, etc. it works very nicely indeed. Also, the bits used are of the SDS variety. Not everyone has this type of bit, but for heavy duty chiseling and hammer drilling it is hard to beat. I do believe Milwaukee sells a conversion chuck that allows you to use regular drill bits in an SDS drill like this one. On top of that for [...] dollars from [...] , boy what a bargain for quite the big tool! I have about six 18volt nicad batteries at home and love the opportunity to pick up these tools "only". Next is the 18volt impact wrench for [...] bucks!! Also, for those contractors that want to use these bigger tools, get the three bay charger that Milwaukee sells. It keeps three batteries charging at once and even takes batteries that I removed from my job's recycling bin and brought them back to life! Worth every penny!! But I digress....You will not be disappointed by this purchase for sure.....

Images Product

Buy Bare-Tool Milwaukee 0856-20 18-Volt Cordless Compact SDS Rotary Hammer Drill (Tool Only, No Battery) Now

Bare-Tool Milwaukee 6320-20 18-Volt Ni-Cad 6-1/2-Inch Cordless Metal Cutting Circular Saw (Tool Only, No Battery)

2009-11-29T18:07:00.001-08:00

Buy Cheap Bare-Tool Milwaukee 6320-20 18-Volt Ni-Cad 6-1/2-Inch Cordless Metal Cutting Circular Saw (Tool Only, No Battery)

Buy Low Price From Here Now
Tool includes: 6 7/8" blade. However 6 1/2" blade also work fine with this circular saw. Metal Cutting Saw, 6320-20, cuts all types of metals such as uni-strut, galvanized pipe, metal studs and black pipe, as well as Hardi-Plank and Durock materials. The saw uses a standard 5/8 in. arbor and has a 2-1/8 in. maximum depth of cut. The blade spins at 3,200 RPM and has an electric brake for quick, repetitive cutting. The clear guard provides an excellent line of sight for cutting and the rugged construction provides long, trouble-free operation.
Readmore

Technical Details

- Cuts all types of metals such as uni-strut, galvanized pipe and metal studs
- 3,200 RPM and 2-1/8-inch maximum depth of cut
- Clear guard provides an excellent line of sight for cutting
- Rugged construction for long, trouble-free operation
- Limited warranty
See more technical details

"What a Great Little Saw" 2009-10-09
By Alfred R. Wall (Lake Gaston, NC)
I was searching for a metal cutting blade for my Milwaukee 18V 6 1/2" saw when I found I could buy the "bare tool" saw and blade almost as cheap as I could buy the blade. What a smart buy. I purchased this for a demo project that involved cutting 5V tin from a roof. This thing is awesome. Cuts through the metal like butter. What a great find. I'm now going to buy the Lithium-Ion batteries to enhance my bag of tools. I highly recommend this little saw.

"Metal cut saw" 2009-10-05
By R. Busk
The saw lives up to its name. I am impressed with what it can do. The only thing I was disapointed with was how fast the battery ran out of juice. Concidering what I was cutting I can't complain about it.

"Slick little unit." 2009-05-15
By Weldon W (Vancouver, BC Canada)
What can I say, it's a slick little unit and does what it claims to do. I initially bought one saw. But after pricing out what a spare blade would cost, I ordered up a second saw from Tool King. It worked out as cheap, if not cheaper than buying the the blade by itself. Both shipments came with a saw, blade, safety glasses & believe it or not, a CASE! No complaints at all with Tool King. Like the other reviewer, I initally considered purchasing from DAMLOW PRICES as they were a few bucks cheaper than Tool King when you added in the shipping. Ultimately due to Tool King's higher positive rating here & on Ebay, I chose them. Glad I did. BTW, The saws that I received from Tool King came with a 36 tooth 6-7/8" metal cutting blade that uses a 20mm arbor.

"Perfect Milwaukee Quality-and some of the vendors are pretty great also" 2009-05-09
By Stephen Cunningham (Northern Michigan)
34 x 52 pole parn burned down last week. I purchased this saw to cut up the huge pile of sheet metal scrap from the roof and side walls. This tool won't cut anything because the vendor "DAMLOW PRICES" shipped it to me without a blade. How can you call something a "metal cutting circular saw" if you don't ship the "saw" part of the tool with the motor. They should advertize it as a High quality motor with a handle, because that is all they sold me. They didn't sell me a saw. The vendor "DAMLOW PRICES" decided to remove the blade before shipping the saw to me. I have purchased Milwaukee, DeWalt, Makita and even the cheap Denali cordless circular saws from various venders as "bare tools" and they always come with the blade. They are shipped from the manufacturer that way. This vendor clearly shows the blade in the picture and clearly indicates that the battery doesn't come with it. The product description states

"Product Description

Tool includes: 6 7/8" blade".

Milwaukee makes great tools but this one is useless to me. Now I have to pay to return the saw and I still have several thousand square feet of burned and twisted steel barn siding and roofing to deal with......."DAMLOW PRICES" is the only vendor I have ever purchased from that removed the blade from a saw before shipping it as a bare tool. It is unlikely that I will ever buy anything from "DAMLOW PRICES" again.

I have returned this tool to "Damlow Prices at a cost of $16 using the U.S Postal service. They sent me a refund that was $17 less than what I origionally paid them, so it only cost me $33 and I recieved nothing of value for it. What a deal! I have posted a photo of the 10 other "bare tool" circular saws that I have purchased from various vendors. Every one of them came with a blade, what a concept!

I ordered a replacement from "Tool King". I assume all is well and will edit this if it is not. Milwaukee makes great tools.

My saw arrived today (June 1st) from "Tool King". It was more than I expected. It came with a red plastic "Milwaukee" tool case that is large enough for the tool, has storage space for a spare blades and has room for a battery charger and spare battery (battery and charger not included). It also came with the "Milwaukee" metal cutting blade (mounted in the blade storage area of the case, a pair of "Milwaukee" safety glasses, and the "Milwaukee" owners manual and product registration paper work sealed in plastic. This makes for a first class package. When I ordered a "Bare tool" I only expected to get the saw and the blade. The storage case and the safety glasses were a pleasant suprise. I will take some photo's of this saw actually cutting metal and post them in the near future. (I have 20 foot long metal roofing panels that I have to fit into a 18 foot long trailer). "Tool King" will be at the top of my list for future purchases. They sent me everything that "Milwaukee" sent to them.

If you buy this from "Damlow Prices" you will not be able to cut anything with it because they don't ship the blade with the saw and if you ask them to supply the blade they won't, and then they will tell you to send it back at your own expense. That is my experience, perhaps yours will be better. My experience is that I am out $33 and they get to sell this same saw to someone else and make even more money. Since it didn't come in a "Milwaukee" box makes it me wonder how many other people have bought this same saw and returned it in its plain brown box.

Please vote if this review was helpful. I sure wish I had the chance to read a review like this before ordering anything from "Damlow Prices"

"Unbelievable!" 2009-04-23
By James W. Krehmke (Oregon)
I purchased this saw as a bit of an unknown. Seemed that it might be useful IF it worked as expected. No way - it's MUCH MUCH better than I could have imagined. First cuts through 1.25 inch thick wall tubing. No fuss, no effort, NO SPARKS. Smooth cuts with few or no burrs. Why haven't I had one for 10 years? Oh well, live and learn.

BTW, I am using this with the V18 Lithium batteries. It was designed for NiCads, but is forward compatible.

Images Product

Buy Bare-Tool Milwaukee 6320-20 18-Volt Ni-Cad 6-1/2-Inch Cordless Metal Cutting Circular Saw (Tool Only, No Battery) Now

Bare-Tool Milwaukee 0724-20 V28 28-Volt 1/2-Inch Lithium Ion Cordless Hammer/Driver Drill (No Battery)

2009-11-27T19:26:00.001-08:00

Buy Cheap Bare-Tool Milwaukee 0724-20 V28 28-Volt 1/2-Inch Lithium Ion Cordless Hammer/Driver Drill (No Battery)

Buy Low Price From Here Now
Milwaukee 0724 Cordless 28 Volt 1/2 in. Hammer-Drill uses the Milwaukee built high power motor to develop an enormous 600 in. lbs. of maximum torque and 0-600/0-1800 rpm, ideal for drilling larger holes and driving larger screws faster! Powering the 0724 is the revolutionary 28 Volt Lithium-Ion battery pack exclusively from Milwaukee. The 28 Volt battery pack weighs less than an 18 Volt pack yet delivers two times the run-time, making this the ideal solution for all drilling and driving needs! Only the Milwaukee battery can be inserted in the reverse position which allows for the ultimate balance when working overhead or in hard to reach areas. The 0724 comes standard with a 1/2 in. all-metal, single-sleeve, ratcheting chuck with all carbide jaws that keeps bits from falling out and drill bits from slipping! This is the industry's tightest gripping chuck and comes standard only on the 0724. A comfortable non-slip, soft-grip handle reduces vibration and fatigue. The 0724 also comes standard with the patented Clip-Lok System. The Clip-Lok System attaches securely to the operator's belt or tool bags and easily releases with one hand, ideal when working from a ladder or when there is nowhere to place the tool when adjusting or positioning a work piece. The Clip-Lok System keeps the drill within arms length at all times. The Clip-Lok System also features an on-board bit holder which holds up to two standard Phillips bits. Tool only (no battery or charger) Clip-Lok System Side Handle No. 2 Phillips Bit. NO INCLUDES- Tool ONLY.
Readmore

Technical Details

- Cordless hammer/driver drill powered by 28-volt lithium-ion technology
- Up to two times the average run-time of 18-volt tools; 600 in./lbs. of maximum torque
- 1/2-inch all-metal, single-sleeve, ratcheting chuck with all carbide jaws
- 28-volt hammer drill
- 5-year limited warranty
See more technical details

"I love it." 2009-05-31
By J. Griffiths
Easy to use and power to spare.

I have a corded drills and a V28. I reach for the V28 all the time. Have not run into an instance that the V28 could not handle.

"very week" 2008-07-13
By Gerrywalton (USA)
i had av724-20 for about a WEEK IT FELLOVER THE HANDLE BROKE MILWAUKEE WOULD NOT REPLACE IT. EVEN THOUGH THEY ADMITTED THE HANDLE TO BE WEEK....

"Amazing drill" 2008-01-30
By Matthew W. Pletcher
I'm a commercial electrician and use this drill daily. Sometime for hours at a time. It has a ton of power. So much in fact it will darn near break your wrist if what you are drilling catches the bit and turns the drill when you least expect it. I'm constantly using large bore step bits to drill into steel j-boxes, door frames, etc. It's perfect. I have 3 other cordless drills and they stay at home. This is the only one I take to the job site with me every day. I'm so hard on this thing. I use it and use it hard. I have no clue what Consumer Reports could have possibly done to break it. I've used it so hard the drill body was too hot to rest your palm on and it didn't even smell. I've dropped it off a 10 foot step ladder onto concrete, picked it back up and used it the rest of the day. I've owned it 8 months and have put it through more than most people will in a lifetime and it's still going strong. I can't say enough about how extremely durable it is.

On the hammer setting it will drill 1/4" holes in block but that's about it, so don't expect much from the hammer setting if you have anything heavy-duty to drill. I use the Milwaukee 28v cordless SDS hammer drill for 99% of my hammer drilling anyway. (that drill is a superb hammer drill BTW)

As far as the other reviewers rating the drill down, READ THE PRODUCT DESCRIPTION!. Under the caption "What's in the box", it says one hammer drill! That's it! READ next time you fools!

"Milwaukee 28v Hammer Drill " 2007-12-02
By P. Johnson (Pengilly, MN USA)
I purchased the "bare tool" because I have some v28 batteries, I like them because they stay charged on the shelf (within reason). This drill broke in Consumer Reports testing of hammer drills. Also, it is made in China. Performed very well in drilling concrete block for anchors. The side handle is the best yet of Bosch, DeWalt, Makita that I own. It is easily adjustable and stays put. UPDATE: 11/09 Recently had a conversation with a sales person at H.D. orange store. He said that they (H.D) are no longer pushing the 28v Millwaukee stuff due to the many failures in this line of tools. Basically because Millwaukee is using 28 volts on 18 volts guts.

"The best brand" 2007-03-30
By C. K. Au (USA)
Milwaukee is the best among all other so called industrial brands.

It has the best design, durability, and inter-changeable battery among other Milwaukee lines.

I originally found this to be a bit expensive, but gradually, I started to found the long term benefits of owning the best tools and I now would strongly recommend this brand and its tools to peers who are into DIY stuff.

Images Product

Buy Bare-Tool Milwaukee 0724-20 V28 28-Volt 1/2-Inch Lithium Ion Cordless Hammer/Driver Drill (No Battery) Now

Milwaukee 0721-21 V28 28-Volt Lithium-Ion 1/2-Inch Cordless Right Angle Drill/Driver Kit

2009-11-27T00:25:00.001-08:00

Buy Cheap Milwaukee 0721-21 V28 28-Volt Lithium-Ion 1/2-Inch Cordless Right Angle Drill/Driver Kit

Buy Low Price From Here Now
This Milwaukee 28V cordless right angle drill is designed for boring large holes between studs or joists or in tight areas. V28 lithium-ion battery technology delivers up to twice the run time of Ni-Cd tools. This tool is great for plumbing and electrical applications such as drilling holes to run wire through studs and joists or boring holes in floors for plumbing venting. Rugged motor and geartrain are durable enough to handle the toughest jobs. Max. Torque (in.-lbs.): 1,081, Volts: 28, Speed - No Load (RPM): 0 - 400/0 - 1,000, Chuck Size (in.): 1/2, Reversible: Yes, Side Handle: Included, Battery Included: Yes, Charger Included: Yes, Case Included: Yes
Readmore

Technical Details

"Power for winch on sailboat" 2008-11-30
By D. Jackson (Seattle, WA)
It is not a total substitute for a permanent power winch on a 43' sailboat. Easy operation for the initial grinding on the main halyard or a jib sheet but will fault out (stop) when it gets close to the end (last 4-6 feet). Easy to handle as long as the winch is self-tailing.

"Impressive" 2008-08-26
By T. Judd (Berkeley)
I'm an electrician working in the bay area and this tool is new to our truck. We just finished our first big job using it exclusively. The convenience of this tool is amazing. It works steady and compared to our super hog it works slow but by the time the super hog is set up this drill has made the hole and is back in the box. I really wish milwaukee could figure out a way to adjust the angle of the neck without the use of wrenches but this is their standby right angle drill design and I guess they are sticking with it. Battery life is good and we use three V 28 tools now so lots of batteries kicking around makes everything convenient. We will buy more of these in the future.

"nice product" 2006-11-03
By A. Hovak (upstate NY)
The product is extremely heavy duty and works for everything you'll need a right angle drill for. I have a 28v hammer drill and a 28v impact wrench as well and they all perform exactly as described from the manufacturer. For the price, the 28v units are pretty pricy. The fact that they are so expensive and there is only 1 battery is the only reason I gave it 4 stars. If this review was based on the quality alone, it definelty gets a 5.

"great product" 2006-06-05
By A. Firestine (Fort Wayne, IN)
I have been using this item for about a week now and it is impressive! With almost 1100 in/lbs of torque this drill eats through 2x studs like you would not believe! This item really lives up to the claim of corded performance without the cords. The batteries last longer than any NiCd on the market. I would have like it to have a keyless chuck as the keyed chucks are a little less convenient. A rep for milwaukee said they tried the keyless chucks but the bit would slip so I guess they did the right thing in making the keyed chuck. It can also be inconvenient to adjust the drill although it can be rotated a full 360 degrees which is a great feature. Otherwise a must have for plumbers and electricians!

Images Product

Buy Milwaukee 0721-21 V28 28-Volt Lithium-Ion 1/2-Inch Cordless Right Angle Drill/Driver Kit Now

Bare-Tool Milwaukee 0721-20 V28 28-Volt Lithium-Ion 1/2-Inch Cordless Right Angle Drill/Driver Kit (Tool Only, No Battery)

2009-11-23T20:49:00.001-08:00

Buy Cheap Bare-Tool Milwaukee 0721-20 V28 28-Volt Lithium-Ion 1/2-Inch Cordless Right Angle Drill/Driver Kit (Tool Only, No Battery)

Buy Low Price From Here Now
Milwaukee's cordless right angle drill is designed for boring large holes between studs or joists or in tight areas. This tool is great for plumbing and electrical applications such as drilling holes to run wire through studs and joists or boring holes in floors for plumbing venting. The tool features an extremely rugged motor and gear train that is capable of handling some of the toughest jobs and is durable enough to withstand job-site abuse. The 0721 features a 1/2 inch keyed chuck that includes a thick, clear coat finish to help prevent rusting.
Readmore

Technical Details

- Light weight - 28V power with 18V weight
- 2-9/16" Capacity - Drilling 2x material with a selfeed bit
- Heavy Duty Gear Box, 0-400/0-1000 Rpm; 1081 in.-lbs max torque
- Head and handle swivel 360 deg - can be locked tight in any position
See more technical details

Images Product

Buy Bare-Tool Milwaukee 0721-20 V28 28-Volt Lithium-Ion 1/2-Inch Cordless Right Angle Drill/Driver Kit (Tool Only, No Battery) Now